|11-15-2012 02:16 PM|
I am going to use the current Olds TH400 though with a Summit adapter
|11-15-2012 01:37 PM|
|ap72||It may not be exactly period correct but a Torker intake looks very similar, can be picked up super cheap, and produces decent results- it's not as good as an RPM intake or something of that nature, but it does still have the look your after.|
|11-15-2012 01:37 PM|
|vinniekq2||torkers were very popular back in the early 70s/tarantula/scorpion,,,,,,back in the sixties,the z-28 intake was around but expensive,offenhauser had some unpopular intakes back then. The only intake I currently have is the holley street dominator,and its not impressive or retro.|
|11-15-2012 01:31 PM|
I would have never guessed a single plane would help MPG
Wanna trade for a dual quad intake? I think my dad has a couple old AFB's in the garage
This is it
|11-15-2012 08:59 AM|
|vinniekq2||Ill take that street master intake. Like tech said,its great low rpm intake,my choice for mileage builds. not my choice for power|
|11-15-2012 08:49 AM|
|AutoGear||Ive seen a couple non airgap RPM manifolds modified for a fill tube with the EGR in the tube (I think). Cool deal. I'd use a 300-36 manifold and a Holley. Or go Dual Quads. The 60s are my favorite era for Hot Rodding. You went from 283s to 350s; dual quads, tri-power, superchargers, turbochargers...Its wide open. That street master has to go though. As far as the cam; Im a UDHarold fan, or Id call Isky but thats personal preference. Dont forget the CherryBombs!|
|11-14-2012 09:57 PM|
Strange deal, Streetmaster intake with 200cc heads?????
I've used a Streetmaster in the past. They are excellent for idle to 4000 due to the tiny little runners, but run out of breath up in the range. It's almost like the manifold will be signing off right when the heads begin to come on.
|11-14-2012 08:25 PM|
|vinniekq2||did you talk to Ryan Hart at comp?He takes awhile to respond,,,|
|11-14-2012 08:08 PM|
Just to follow up, I got a reply from Comp Cams about getting their 280H Magnum with a 112 LSA ISO 110:
Tracey, we can help you with this for sure. We can grind that on what
ever LSA you would like. The 112 LSA will smooth the idle out a little...
And push the power band to the higher RPM side. It will also lessen the detonation threshold.
How much RPM are you looking for? Let me know and we will go from there. Thanks.
Please use the "reply" button so that I can keep track of the
COMP Performance Groupô
3406 Democrat Rd.
Memphis, TN 38118
|11-12-2012 09:59 PM|
|11-12-2012 08:56 PM|
|11-12-2012 08:54 PM|
|vinniekq2||you can tell by the sound if a cam has a dual pattern?|
|11-12-2012 08:52 PM|
As for the oil fill tube- there are other ways to get oil in an engine.
|11-12-2012 08:41 PM|
Trying to achive a 60's hotrod look & sound with this engine - it's going in my 59 Chev pickup
|11-12-2012 08:21 PM|
|This thread has more than 15 replies. Click here to review the whole thread.|