|10-24-2013 11:32 AM|
I keep getting this Error page and its getting agrivating because its happening more often!!!! This is the error page that keeps coming up when I try to post:
QUOTE: "Database Error Database error
The Hot Rod Forum : Hotrodders Bulletin Board database has encountered a problem.
Please try the following:
Load the page again by clicking the Refresh button in your web browser.
Open the Hot Rod, Street Rod, and Muscle Car Mega-site -- Hotrodders.com home page, then try to open another page.
Click the Back button to try another link.
The Hot Rod, Street Rod, and Muscle Car Mega-site -- Hotrodders.com forum technical staff have been notified of the error, though you may contact them if the problem persists.
We apologise for any inconvenience." END QUOTE
|10-23-2013 11:47 PM|
A glitch of some-kind I guess LOL
|10-23-2013 11:29 PM|
LOL, yes it's the wrong thread but how in the hell did you do it? This hasn't been viewed in almost a year! LOL
|10-23-2013 09:48 PM|
And more LOL
Jester Hell I posted on the wrong THREAD LOL Sorry GUYS
|10-23-2013 09:43 PM|
I worked on working up to cleaning my garage and deciding where and what corner to start in LOL The Vett is parked outside under the car port and its snowing so I started and the more I clean the more it seems is left
|11-22-2012 04:03 PM|
|gdstock||When they want to total a vehicle, the usually have a set of comps to compare. I was living in Abilene TX and they used inapproriate vehicles to compare, say a st trans vs auto. And they used prices form El Paso....No one from Abilene shops for cars in ElPaso! Did my own comps, and got them up form 2500 on wife's Elantra to $4000. Just have to out work them and blow up their basis for costing. Best set of numbers (valid) usually wins.|
|11-22-2012 08:06 AM|
save the bumper even if tabs are broken. Fix them and save tons of money. Replace the fender though. Just the dent itself in a shop atmosphere would call for it to be replaced but the location of the dent is why you should replace it. When it's deformed anywhere near the bumper like that it usually rolls downwards, affecting the gap/fitment to the bumper, headlight, and even the hood. You will also find a bent fender bracket.
I recently swapped out a support on a 07 Jetta and right away I told the boss the fender should be replaced cause it rolled, which is typical procedure if you ask me. He declined(customer pay) cause to the naked eye it looked like a small dent. so I had to bend the fender bracket, bend the area where the bumper mates to the fender, and roll it back over to fix the hood gap. It affected the hood gap cause the fender jamb area wasn't solid across the fender jamb, it has voids so in those areas where there was metal you can clearly see it deformed. So I had to roll it over on top without marring the paint. This was supposed to be a 1.5 hr fix but it turned out to be 2-3 hours to fit right and mocking up hood, bumper, lights, and then mud. This one affected everything which is on the extreme side, but anytime you're hit in that area it will at the very least leave a gap to your bumper. Sometimes it can be so bad you question whether or not it's a good thing to continously put wear on your tabs for the mock up involved. In any case, I personally like those jobs cause you have to figure it out yourself but it can be a headache when someone is expecting that aspect of the repair to go a little quicker or if you don't foresee it being an issue, but once you know to at least mock up your bumper and check fit it's not so bad.
|11-20-2012 10:06 PM|
|lowROLLERchevy||If it gets a salvage title, thats fine. Max $ for the car is what im after ..|
|11-20-2012 08:31 PM|
|11-20-2012 08:06 PM|
I don't know what book value is on your car and I'm not sure how Insurance company's work in the US but in Canada they write a car when the repairs reach a certain percentage of the value. Not sure getting a higher estimate is going to get you more money for the Ford. What you can do is argue with the insurance company for reasons, like low mileage, or that it was in excellent condition prior to the accident...be a PITA and they might give you more just to get rid of you.
That sounded rude...but insurance company's have meetings with adjusters and the adjuster doesn't want a claim outstanding to long, he'll get called on the carpet.
Just a thought
|11-20-2012 07:56 PM|
So, Allstate wrote the car for $1350 .... and their adjuster thought he was to smart to talk for me ... ok i dont mind $1350 ....
then Allstate decided that I'm 25% at fault because i didnt avoid their customer by slamming my car into the divider in the center of the road (they didnt say it like THAT but its what i would have had to do)
So now i have a new estimate. $2450 for the repairs not including the busted fog light and the belly pan thats dragging on the ground ..... or any of the possible suspension damage.
i think ill just keep getting estimates till someone writes one for like $3100 and THEN call Allstate back w/ an offer of my own.
|10-31-2012 08:11 PM|
|10-31-2012 07:34 PM|
The cars being left as is and its getting a custom plate. The name "contour"
has always been shortened by my fiends into what got to be one of the most
loathed words in the English language.
Doesn't help that NYS lists the model as "CNT" on the title.
Also doesnt help that the NYS DMV allows "CNT" on license plates
|10-31-2012 03:01 PM|
|dirtyfingers||I like the way lizer thinks, have the best of two worlds keep the mony and patch it up real cheep. duraglass the fender ,buy spray paint to match,who realy looks?, and take the wife or girlfriend to dinner.|
|10-29-2012 05:41 PM|
|Lizer||does the bumper actually need replaced? Is it broken somewhere underneath? If it's just dented/smooshed, take a heat gun or hair dryer to it, get it really warm, then push it into shape from the back with your hand. Hold until it cools and it will keep that shape.|
|This thread has more than 15 replies. Click here to review the whole thread.|