|11-26-2012 11:09 AM|
The co-worker of mine with the Impala was warned, by a number of people not to give him the car and money, and there it sits.
|11-26-2012 09:49 AM|
I thought the days of stepping over a turbo 350 and a German Sheppard to get to the owner of a repair shop where over, I guess it's still alive and well.
|11-26-2012 09:19 AM|
I have a co-worker who has a 64 Impala in a mechanical shop who has had it four or five years, maybe six I forget.
He gave him the body on a cart, the frame fully powder coated with all the suspension, inner fenders, rad support, the whole deal. The motor to rebuild, and $4500 to start. Not a SINGLE bolt has been turned, NOTHING.
This POS has that body over on the side BEHIND a couple other cars and PILES of shelves and boxes and what have you. The frame is up on a shelf 15 feet off the ground. He has never touched a nut or bolt!
He also had another co-workers 51 Chevy pickup in there for about a year for an engine and mustang II swap. I have bought the beautiful dropped axle off the owner of the truck. It is buried in the shop under the 64 Impala body, along with the 55 pass car rear end that I want and the 235 too. I have went by there day after day for weeks, then to once a week for months, I have been going over there to check to see if he cleaned out the mess since JANUARY! It's coming on a friggin YEAR and the stuff is still trapped back there. And believe me, don't go thinking I could get that axle out somehow under the body or car next to it or something, we are talking BURIED there is NO WAY to get it out without moving everything in front of it!
Oh yes poor dumb bastard, what kind of money can you be making when there are only two stalls left in the shop that aren't storing something? This is about a five thousand square foot shop! He has TWO Stalls operable!
|11-26-2012 06:55 AM|
|11-26-2012 12:09 AM|
LOL, yep in some shops five years is nothing!
|11-25-2012 11:26 PM|
[QUOTE=mr4speed;1615843]Hey you just never know what bodyshop is doing that..............I did one that sat in a shop for......get this....11 YEARS!!!!!![/QUOTE
I hope they didn't work on it on a daily basis. LOL
|11-25-2012 08:52 PM|
|mr4speed||Hey you just never know what bodyshop is doing that..............I did one that sat in a shop for......get this....11 YEARS!!!!!!|
|11-25-2012 06:01 PM|
|novafreek6872||Its 5 years later, if it isnt painted by now its never gonna be!! LOL.|
|11-25-2012 04:39 PM|
|oldfart952||hi, kirker has some great urephane paints out there .COLORS ARE SUPER. centari is one of my favorites loved the smell s. except greens alway different. good luck !!!!!!|
|10-23-2007 10:44 PM|
Dave is right about tcpglobal website. I look at it pretty regular. Once you get the hang of it, you will use it also. John
|10-22-2007 09:02 PM|
|baddbob||What type of a repair are you doing? I'd guess you are trying to do a repair on a 69 Chev that was repainted in Centari? One Dupont option would be to have the color matched in Chroma-one single stage urethane, another option would be to match the color in basecoat Nason, or Chroma Premier, or Chromabase do a blend and clear over the exhisting Centari-this may require blending the paint into an adjacent panel. Any knowledgable paint supplier should be able to set you up with a match that's close enough for a blend-this gets done all the time.|
|10-22-2007 07:23 PM|
Ladyann, To the best of my knowlege GM was still acrylic laquer across the line if I'am wrong I'd like to know what divisions were using Centari. Thanks Pete
|10-22-2007 05:12 PM|
The website is a bit confusing but is pretty good once you get the hang of it.
|10-22-2007 04:08 PM|
Paint - Centari
Need some assistance. Need to match a 1969 GM Centari paint - we cannot use Centari. Color: 99Chat. Mauve (5046A, Alt. 1) Could some tell me how to cross this to Dupont Chromapremier?
Dupont says they can't help.
Your help will be greatly appreciated.