|12-04-2012 09:57 PM|
|11-28-2012 10:25 PM|
The difference can be seen externally- take a look here for more info on ID'ing it.
|11-28-2012 12:42 PM|
as it was leaf spring..
look at the center of the rear end, where the driveshaft is.. on the drivers side of the shaft. if there is a mounting boss. going straight up and down..
if it has this type mount for a torque arm it's from a 82-02
and they had many running changes on the rears of those
the rear in photo is a ford 9" but will give you an idea where the mount for the torque arm is
|11-28-2012 09:49 AM|
Yes NAPA none of the other stores like Auto Zombie will have a clue. If you cannot tell them exactly what it came from so they can look in their catalog they are brain dead IMHO.
|11-28-2012 08:36 AM|
Some later 3rd gen (82-92) Camaros had disc rear on up through 93-02 (4th gen).. They were aluminum single pot calipers 98-02.
I'd say take an inner and outer pad to Napa and say 'Camaro rear'... Maybe they can match you up a set.
|11-28-2012 05:15 AM|
10 bolt Camaro differential with disc brakes
I have a 57 Coupe with a factory Camaro disc brake rear end I have no idea which model its from and I wish to replace the calipers. Can anybody tell me which models had the rear discs or how to identify this rear end?