Got a 59 Chevy wagon, putting together a 383 for it. I'm wanting a good 400 or so HP and good torque... almost daily driven rig. I like a good thumpy cam but want it civil as well.
Looking for advice on a roller cam
383 ci
9 to 9.5-1 compression
Vortech heads
Edelbrock performer RPM manifold
Stree Demon 625 cfm
Sanderson cast headers
700r4
1800-2000 stall convertor
3:73 gears w/ 29" tire
Got a buddy happy with his GM 10185071 roller, but he's in another state so I can't check his setup out.
So far...most stuff I've built I've always erred on the side of conservative, and almost always wish I'de gone further.
Any advice appreciated!!
Looking for advice on a roller cam
383 ci
9 to 9.5-1 compression
Vortech heads
Edelbrock performer RPM manifold
Stree Demon 625 cfm
Sanderson cast headers
700r4
1800-2000 stall convertor
3:73 gears w/ 29" tire
Got a buddy happy with his GM 10185071 roller, but he's in another state so I can't check his setup out.
So far...most stuff I've built I've always erred on the side of conservative, and almost always wish I'de gone further.
Any advice appreciated!!