|12-12-2012 06:11 PM|
Or You can use a drill press to make a plate manifold out of 1/4 inch steel stock. If the intake port are close together you may be able to use side draft webbers and the plate with some short pipes and mounting plates to hold down the carbs if you understand me.
|12-12-2012 06:02 PM|
BBQ a whole Cow.
You can get some bricks make a fire pit and use charcoal, My older brother told me about a guy that he knew heated a 4 cyl block with charcoal, added ribs to the bottom end. I don't know how Nickel arc rod would work. It is expensive. If you have a gasket to use for a pattern you could make or order the plate from Ufab, some tubing and carb plates . I made a spider leg intake for my corvair powered/dunebuggy. I machined the intake portion of the combo-head-intake . added more carb flanges, then built the manifold like a set of headers . 3 pipes coming up from each side to the carb box. It would pull the wheels up in second gear.
|12-12-2012 05:42 PM|
|hcompton||Call edelbrock and ask if they can still cast you one. If they have sold it in the past they will usally build you one up. Since they have been making parts for years its a good chance they made on at somepoint and may have them on the shelf. You will need to call, internet request will probably result in random information as you never know who will answer. A great etch or some arse clown in the customer service department.|
|12-12-2012 05:13 PM|
|j-stylez||Thanks for the tips guy! I'll certainly check out those links. I like the idea of trying to make my own too, but my stove ain't big enough !LOL|
|12-12-2012 06:54 AM|
Thanks for the link, Cobalt.
The good news is that Thickstun DID make a dual-carb intake for the Chrysler straight 8 (according to this article)
The bad news is that Vic Edelbrock started out at Thickstun ... so that tells you how long ago that manifold was produced!
Who knows, though ... you may end up finding one on e-bay.
|12-12-2012 06:35 AM|
you can do it.
Years ago there used to be kits you could buy to add a couple more carbs to your stock 2 barrel manifold by using a hole saw and welding them on, In the mid 50's I split my 6 cyl exhaust manifold, make new steel pieces, cut the stock manifold, then heated up the manifold in the wood burning stove with a hot fire when the folks were gone, I had the Arc welder cord thru their bedroom window, pluged into the elect. stove outlet in the kitchen, welded it all together with E 60 11 rod then ran it back inside the house and put it back into the firebox and let the fire slowly die down and slooow cool the manifold. Ufab intakes sells kits for V8's and some inliners but I haven't seen any for your engine, but you might be able to buy some pieces. My brother built a 6 carb manifold for his hemi in his dry lakes 36 ford. I have been looking at a 6 carb kit for My buick nailhead.
|12-12-2012 01:42 AM|
Help needed-Intake manifold ID 30's-40's
|12-11-2012 09:15 PM|
I just checked at Clifford Research (the inline 6 performance experts) but didn't see any Chrysler Flathead 8 stuff.
I also thought of Inliners International devoted to all Inline powered vehicles ... but I didn't dig to deeply. I would imagine that signing up on their BB might get you some sources?
|12-11-2012 08:21 PM|
|SSedan64||If there had been it probably would have been listed here > http://www.exeterautosupply.com/Docs...%20catalog.pdf but, I only see Chrysler/Dodge/Plym 6cyl.|
|12-11-2012 04:33 PM|
G-day all, Just wondering if any of you know if there was ever any kind of a 4 bbl or multi-carb intake made for a Chrysler straight 8?