|12-18-2012 11:40 PM|
|Predator4||Cheers...All the help is great thanks|
|12-18-2012 04:36 PM|
|1971BB427||Reach in and wipe the pinion gear clean enough to put a mark on one tooth with a white crayon. Then turn it and count from your mark. Same for the ring gear.|
|12-17-2012 12:24 PM|
|Predator4||Hi thanks. I have not pulled the cover yet... hope to take a look this weekend. Thanks again cheers|
|12-16-2012 10:34 AM|
|vinniekq2||If you have trouble counting the pinion gear,look at the side of the ring gear.Most of them have the two numbers stamped on the edge like 41-11|
|12-14-2012 02:01 PM|
|Predator4||Thanks easy when you know how...Cheers|
|12-13-2012 10:55 PM|
|big gear head||Count the teeth on the ring gear and the pinion gear. Divide the number on the ring gear by the number on the pinion gear and that is your ratio. 41/11=3.73...|
|12-13-2012 10:33 PM|
|Predator4||Thanks for the info. Sorry totaly new to diff stuff....so I count the teeth. What does this tell me?|
|12-13-2012 12:50 PM|
I know it's a pain, but pop the cover and count the teeth.
Only way to be sure of the ratio.
|12-13-2012 11:36 AM|
|Predator4||Cheers ...The code seem a little unusual. Can not find any reference to the numbers|
|12-13-2012 08:11 AM|
|big gear head||'71 Camaro would have the 8.5 10 bolt if it hasn't been changed. I can't find a GO code for the Camaro.|
|12-12-2012 11:29 PM|
1971 Camaro Diff ID
1971 Camaro base model. 10 bolt diff. I can not identify the diff. Has a number on the rear N then below 1285542. Passengers side stamp GO26 2 or G026 2. I have tried the internet but can not dial in on the right info.
What diff....what ratio? Does anyone have any ideas?