|04-22-2015 05:53 PM|
Same thing here.
|04-22-2015 03:17 PM|
|04-22-2015 02:59 PM|
|Too Many Projects||
|04-22-2015 01:33 PM|
|04-22-2015 05:15 AM|
|matts37chev||Looking good nunattax|
|04-21-2015 04:28 PM|
|Leakie||Yeah it's an IRS! Is that an aftermarket unit or is it from a american or euro car?|
|04-21-2015 02:56 PM|
headlight brackets are one off castings in aluminum,reinforced and with a smaller access for mounting.my original ones were starting to crack.also locktited in high tensile studs ,easier to mount ,no fear of striping threads and i could use locknuts to stop them coming loose.can anyone identify the rear end
|04-21-2015 02:46 PM|
|04-20-2015 09:41 AM|
|Too Many Projects||
Mustang II Power Steering Flow Valve for GM Pump, 2 GPM - Speedway Motors, America's Oldest Speed Shop
|04-20-2015 09:22 AM|
|Leakie||That does not sound too far off. GM pumps can go up to 1500 psi but a Mustang rack can only handle 600-800 psi. Maybe just the refreshing that you did to the front end will help your problem.|
|04-20-2015 08:15 AM|
The rack is from Art Morrison, I believe it's an AGR brand, but I am not sure what it's based on.
Morrison said it should be 1200 psi max
|04-20-2015 07:59 AM|
|Leakie||Borgensen makes a reducer for ps pump if it is GM pump. Do you have a Mustang rack or a T-bird. The T-bird rack can handle the extra pressure the Mustang can't.|
|04-20-2015 05:11 AM|
My next project is to sort out the steering on this 38
It's pretty twitchy at freeway speeds.
I think the new balljoints and adjusted toe will help.
(I will take it to get aligned soon)
But I also want to go through the p/s pump to see if I can reduce the pressure.
(I just need to figure out what it's off of.
|04-20-2015 05:06 AM|
I rinsed out my rad after the CLR soak, and it looked better.
But not good enough.
I only used one bottle in it the the first time, so now I have 3 bottles in it.
I think it was too diluted to do much before.
Thanks for the radiator info guys.
I have been looking at the flex-a-lite rads.
(They are a local outfit and I used to know a few people that work there)
but man, they sure are a lot of money.
|04-20-2015 03:20 AM|
|This thread has more than 15 replies. Click here to review the whole thread.|