|12-28-2012 06:21 PM|
|51 styline||Personal experience from years ago( 1963). A good friend of mine had a stock 55 Chev ,265 3 spd and it ran real good , and it was stock with a 4bbl carb. One day he wound it up and just as he was ready to shift to second gear the clutch exploded ip through the floor and in to his right foot. A piece of the pressure plate came up and bent his steering column and he couldnt steer. Luckily the road curved and he coasted to the shoulder where he braked with his left foot. So YES by all means run a scattershield . I went out the next day and bought one for my 55 which had a 283 with fuelie pistons a Duntov fuelie cam& solids that i was shifting at 7500 RPM.|
|12-24-2012 08:29 AM|
|12-23-2012 10:35 PM|
|12-23-2012 09:34 PM|
|12-23-2012 07:20 PM|
Good advice Tech.. Most of the problems come up when it's "not" a NHRA sanctioned event and the local guys are doing it. I dont have problems with tech because my car in all to date.
But I see them being a holes to one guy but lets it go with the next guy about the same thing.
|12-23-2012 05:36 PM|
6.1 Flywheel Shield, Spec 1.1 & 1.2
(2-Disc Max, or 3-Disc, 8-inch dia. Max) . . . . . . . . . . . . . 5 years
6.2 Flywheel Shield, Spec 1.2, 1.3, 1.4 & 1.5 Clutch. . . . . . . . 2 years
(Check with Manufacturer; May Be Only 1 Year)
6.3 Flywheel Shield, Spec 1.2, 1.3 & 1.4 Clutch . . . . . . . . . . . 2 years
(Check with Manufacturer; May Be Only 1 Year)
If there is no SFI tag on the piece at all, walk away.
|12-23-2012 05:07 PM|
I never, ever told a racer that he had to jump through a hoop unless I could show it to him in black and white in the current NHRA Rulebook and I taught all my students to do the same. I suggested that they imagine a Judge watching over their shoulder as they teched the car and talked to the owner/driver. I remember teching the Budweiser King and suggesting to Kim that the diaper needed padding in it to absorb oil. She got right in my face and said "show me". I opened the book and read the verbage to her. We were pretty fair friends after that, because she realized that I was a professional the same as she was. Here's the verbage from Top Fuel rules....
"A nonflammable, oilabsorbent liner mandatory inside of retention device"
Word would get back to me pretty quickly if one of the tech guys gave a racer a hard time and a word to the Race Director would have the offending tech inspector squared away or gone. I ran the Tech Dept. as a business, just like any other business where you have a provider and a customer. You must be polite with the racers, yet there is a firmness that is necessary, based on the fact that you know what you're talking about and are able to convey the necessities of the situation to the racers in a non-confrontational manner. It goes the other way also; many times in the tech line when I have seen an exceptional way that the racer fabricated something on the car or the way he installed the seat belts or rollbar or cage "by the book", I would call all the other tech inspectors over to look at the car to see how "textbook" actually looks on a real car. Ask me if the owner/builder would grin ear to ear.
I held a National Silver-certified SFI technical inspection license, a National NHRA chassis certification license and National NHRA Fuel Check license.....all the credentials I could hold without being employed full-time by NHRA. I taught many new fellows to be good technical inspectors, with a dozen or so of them achieving the credentials that I held.
If you're having trouble with tech inspectors at a certain track, then the first thing you want to do is to get together with some of the other racers who have had problems at that track and elect a spokesman who will represent all the racers involved. Have that person contact the Race Director or Track Owner/Operator and explain what's going on and the fact that he/she is representing X number of racers who also have had trouble in the tech line at that track. If the Operator realizes that there is a problem in the operation of the tech line, then hopefully He/She will have enough business sense to correct the problem. If the Operator turns a deaf ear, then threatening a boycott of the track would be the next tactic I would employ. If you start gettin' into their pocketbook, they'll usually listen.
If you feel that you need some help from the big guns, please do not hesitate to contact either or both, the NHRA Division Tech Director or the NHRA Division Director. That's what these guys do, work as a liason to keep everything "jake" for the racers out there.
Jonathan Adams, Division Director
818 39th Ave. S.W., Suite A3
Puyallup, WA 98373
Dave Schaffel, tech consultant
Monday and Friday, 7-9 PM, PT
Another way around this getting hassled is to do an extended technical inspection on the car. Call Jonathan and ask where you can get an "ETI". Sometimes the Division Director will hold a chassis certification seminar at a particular track and there would be plenty of qualified technical inspectors available to tech your car and issue an ETI that is sort of like a pass for the following year. You just pull up to the tech line, show your ETI to the first available tech inspector and he signs you off to go race. That is unless he is a complete DDICK, in which case he will have to show his authority by re-teching your car. Some people just do not belong in a position of authority.
You racers will not be out of line to ask to see the tech inspector's SFI card. The first entry level is a bronze tech inspector, then a silver tech inspector, then a gold (you must work for NHRA full-time to get a gold card). If your inspector isn't certified at all and is trying to tell you something that you know is wrong, ask to speak to a silver-certified inspector. If that fails, ask to speak to the Race Director or Track operator.
|12-23-2012 10:24 AM|
|vinniekq2||Make sure the saginaw uses the same scattershield as the richmond? and if you plan to make power,consider a TKO 5 speed,brand new retail they are 2200. extra gear,,extra strong,,different scattershield|
|12-23-2012 05:25 AM|
|12-23-2012 01:32 AM|
That Saginaw 4 speed wont hold up!!!!
|12-22-2012 08:23 PM|
|vinniekq2||You could probably get away with a jobber clutch with the saggy|
|12-22-2012 08:17 PM|
|prostcelica||Do you guys think I will be ok with the clutch that I have for what I want to do with the car?|
|12-22-2012 07:47 PM|
|vinniekq2||Im using a single diaphram 11 inch clutch and a semi light weight steel flywheel(all sfi approved parts). Not sure how light of flywheel you need/want? the good stuff is very good quality,nothing has broken yet. I dont drag race but I have done some comparative driving with some of my friends|
|12-22-2012 07:40 PM|
|carolinacustoms||JMHO the alumium flywheel and dual disc clutch would NOT be street friendly if it is anything like what we used to run in our late model dirt car. Think of it like putting a 4,000 stall in a auto, not impossible but not very street practical either. Again just my opinion anyone feel free to correct me if I am wrong|
|12-22-2012 07:25 PM|
|prostcelica||How come Vin. Do you think that clutch ans a stock flywheel will fit the bill?|
|This thread has more than 15 replies. Click here to review the whole thread.|