|05-03-2013 10:25 AM|
|Leroy's 55||Those are Fenton Wheels, 16 fins, they were very popular in the 7o's.|
|05-03-2013 10:21 AM|
|Leroy's 55||Those 16 fin wheels were known as Fenton Wheels, I am not sure if Fenton is the company that made them or not. I had a set on a 1968 ford pickup, but I know that back in the 70's they made a lot of them.|
|01-31-2013 09:38 AM|
Western Wheels Cyclone. There was another model with more tighter spokes with the name Cyclone if I remember correctly.
|01-17-2013 07:13 AM|
.. The press-in center caps (and stock wheel covers) prolly weren't legal for dragstrip use, because they popped out easily on bumps... could hit spectators... hence the A.R. centercaps have 5 screws holding them on... of course, press-in center caps were great for the sales of replacement centercaps...!!
|01-11-2013 11:33 AM|
These look like my Grewal 14 vane mags that are similar to the Western Cyclone aluminum finned mags. Specs on the mags are Max wheel load 1580 lbs. with Sema 5-1A AF 345569 stamped on rear. Came in 15 x 7 and 15 x 8
inch models. Put up a thread years ago, and one reply came back that were the mags offa Mr T's van from the TV show back in the 70s or 80s.
|01-10-2013 06:30 PM|
|capeduece||my friend has a set of old cragars on his 56 belair and they say cragar s/x on the centercap. they look just like torque thrust but the cap doesn't have the 5 bolts holding it on like trq thrust . I have never seen them on any thing else. they are sweet!|
|01-10-2013 04:37 PM|
|hairy hyde||they look like western wheels|
|01-10-2013 04:36 PM|
|HotrodSS||They are ET's as I had the same wheels on my '72 Cutlass|
|01-10-2013 11:40 AM|
[quote=Northstar T;1625026]Does anyone here recognize these wheels? they have Cragar center caps, but no name on the wheels themselves at all. I've never seen a Cragar anything like these, so caps may well be added later. they are 14x7 aluminum and have 16 spokes. I was told they were purchased around 1978, but not even positive on that. I plan to sell them before long, but would like to know more about them first.
|01-09-2013 11:34 PM|
|BuzzLOL||.. Those look like 'wagon wheels' but with more spokes...|
|01-09-2013 05:46 PM|
Finishing up a 79 lesebre. The wheels are going to be polished up. However one is damaged from hitting a curb. I need one wheel of this sort. Who makes them? What are they? Thank you.
This buick is turning out nice.
|01-09-2013 04:53 PM|
|skipper454||Looks like I just purchased the same wheel (new old stock in box) - 14x7 manufactured by Supperior Industries out of Van Nuy's CA.|
|01-09-2013 03:43 PM|
I bought them in the Early 80's and they were 14X7 that I had on my Pontiac 72 Ventura. Just thought I 'd put that out there.
|01-08-2013 11:48 PM|
|57 Chevy||Could be an old set of "Ansen" mags.|
|01-08-2013 07:46 PM|
|conestogaman||They look like the American Racing Fanstars.|
|This thread has more than 15 replies. Click here to review the whole thread.|