|01-08-2013 09:22 AM|
OK Thanks for the clarification Henry, I wasn't sure...I've done a couple of old Chevy's of that era but only frame on so I wouldn't really have any tricks specific for that type of frame off resto.
|01-08-2013 08:57 AM|
|tech69||not needed in this situation but will remember that. The main issues was the doors up top near the glass. Seems to be a troubled area on those cars that come in and ones that I've seen on the road. The upper portion doesn't seem to match the nice gap below the glass. Also see that on Chevy trucks of that time.|
|01-08-2013 05:15 AM|
I don't know if this would help or not Henry but, when I was working on a 37 Chevy Coupe years ago and was trying to get the door gaps to where I wanted them....I took the coating off of a steel arc welding rod and migged it onto the door...ground off what I didn't want and had a beautiful gap.
I don't know if this would help in the situation your in now or if you've done it before but thought I would mention it.
|01-07-2013 08:37 PM|
|496CHEVY3100||If all panels line up on a 55 its already ben welded cut or fitted ,demand was so high for the all new 55 chevy tolerance was not an issue|
|12-31-2012 07:30 PM|
|tech69||nice shim kit. Sure beats our little plastic bag of randomness. We're getting there though. Just got a brand new lift so eventually we'll get a vise and a bolt bin...one day.|
|12-31-2012 11:16 AM|
Using welded shims as a guide, never thought of that, good one.
And speaking of shims, fender shims are pretty limited.
How about front end alignment shims? There are way more, going all the way down to 1/32" They are nice to have around.
|12-31-2012 09:46 AM|
|tech69||I use two shims welded together and it equals 3/16" exactly. Like I said, on this job it doesn't have to be exact. Just close.|
|12-29-2012 05:38 PM|
Mercedes sells a cool feeler gauge set for panel gaps. You could make one with plexi glass or something of the sort of a few different thicknesses. Typically you are using only a few so you could make one up for this car then when with the next one make that one and so on until you have a number of them in your tool box.
|12-29-2012 05:17 PM|
|tech69||I think I can wing 3/16" gaps all around on these but the only obstacle is time permitted. The boss tells us the guy wants close to 3/16" all around but he's not willing to pay enough to measure every little area and be super critical. Would be nice but I want to keep my job. It's just gotta look good...but even that is a pain in the arse on these 50's cars.|
|12-29-2012 01:19 PM|
But of course it comes down to what are your expectations and passion. If you want them to fit perfect, I mean flawless, all it takes is time.
|12-29-2012 12:41 PM|
|swvalcon||If you think you can get the old cars to have the gaps you see on the newer stuff you'll drive yourself crazy. Most just fit good enough to get the door shut. If you get it right in one spot it will be off somewhere else. The name of the game use to be get it close and let it go.|
|12-29-2012 10:10 AM|
|12-29-2012 10:08 AM|
|12-29-2012 10:05 AM|
|12-29-2012 08:19 AM|
|killeratrod||They slapped them together back then, And now when we put them back together our attention to detail makes it a PITA. The price to pay for a perfect gap! CAR OR WOMAN LOL!!|
|This thread has more than 15 replies. Click here to review the whole thread.|