|01-09-2013 09:46 AM|
|eric302||X2 on the welding gas in the paint to displace the oxygen. I got this tip from Kevin Tietz about 5 years ago. I do some part time collision work so about 4 years ago I was shooting some Chroma snap clear and had about 4 oz of hardner left in a 8 oz can. I used the welding gas trick and just last month needed to use some clear and tried the same clear and hardner. It dried and buffed fine. I was pleasently suprised. Before I started doing this I had hardner set up in the can. I do this all the time.|
|01-08-2013 10:53 AM|
He didn't say "can"
He's talking about paint.
(Probably in a gallon can)
|01-08-2013 07:24 AM|
|01-06-2013 10:20 PM|
Thanks guys for the help. I'm gonna try the test panel and if that goes well I'll use it. I'm fixing this car to sell to finance my next project so if I can save a few bucks on paint that'll help my bottom line.
I've only painted 2 cars before, this will be my third using the acrylic enamel. I will definitely try the urethane next time, maybe a base clear. Just trying to learn as I go along. Thanks for all the help.
|01-06-2013 12:49 PM|
I would open it up, stir it up, close it, shake it for good 10-15 minutes and it should be good to go.
Don't forget to use strainer.
If it hasn't been opened up and reduced it should last quite a few years.
|01-05-2013 05:41 PM|
|deadbodyman||Dont toss it you may want to paint your kids bike or something ,it may be a little thick but just add reducer to thin it out... anyway for a SS paint you really want a urathane, AE just dont last, even with a hardener.white is cheap anyways,plus you'll need at least 3 qts,4 just to make sure.if you want a good inexpensive paint get Nason ful-thane, 10 times better than any AE and about the best cheap paint out there.. now day AE and urathane cost about the same anyways as far as nason (dupont) goes anyways...|
|01-05-2013 12:43 PM|
paint shelf life
thanks for the tip. From now on I'll fill my opened catalyst cans with argon.
|01-04-2013 07:39 PM|
Its half a gallon of cheapie white single stage... how much can that possibly cost??!!
AE sucks anyway, get some Urethane.
|01-04-2013 05:47 PM|
Fill your partial cans with argon from your tig torch, or have a can of bloxygen on the shelf.
The 75/25 for your wire welder will work to, a lot better than leaving air in there, but it wont work quite as well the argon.
It does not matter what brand or type of paint you have, the oxygen and moisture present in the air will ruin the paint over time.
I always shot a bit of argon into any partial cans, especially activator.
|01-04-2013 10:12 AM|
|01-04-2013 10:03 AM|
If ya only got 2 quarts, that ain't enuf to shoot it anyway.
Pony up, throw it away and buy new.
|01-03-2013 05:45 PM|
|01-03-2013 04:57 PM|
Back in the early eighties. I was heavy into paint work. Rebuilding front/rear hits and used cars, along with hotrod stuff.
Closed that shop and moved. Being a pack rat type person. I kept all the inventory, thinking it would be handy on future projects. Which it has been..
Some of the oddball colors are still in the back of the barn. In pint and quart cans. The Centari paints, most colors, still are OK. RM enamels have all pretty much turned to jello. Most of the DuPont enamels are still usable. Just about all the lacquers are still good. The ones that haven't rusted thru the can anyways..
Used some just this last year as base for the Hugger Orange paint on the underside of body and inside the fenders of my Stude gasser to be..
|01-03-2013 12:10 PM|
|cyclopsblown34||Does storage temperature make a difference? I store my materials in the shop and it doesn't get below 70 degrees but will hit whatever the high temp is n the summer. I remember ages ago when i was a parts guy with a mixing bank, we were told to don't let the material get below forty degrees.|
|01-03-2013 11:25 AM|
You know a funny thing I learned as a rep, how long it will sit on the shelves! The batch number on the bottom of the can has the date code. I don't remember it now but I would turn cans over and look at that date code and see 5, 6, even 10 years old!
If they are sealed well they will last a long time. Of course if some is poured from it, now you have air in the can when you seal it, that can be a problem. How much is in the can makes a BIG difference. If the can is almost full, that is going to last a lot longer than if the can has a little at the bottom and is largely air.
|This thread has more than 15 replies. Click here to review the whole thread.|