|01-04-2013 08:28 PM|
Thanks John appreciate the information.
FSTBURN - Sam
|01-04-2013 10:50 AM|
|01-04-2013 10:42 AM|
Seems like we are going back to the future and building items for our cars ourselves like we did in the old days..The economy is taking down a lot of the specialty business..
|01-04-2013 10:02 AM|
I don't know of anyone buying them out fstburn. The basics of any good door panel is using a panel board that will not deteriorate with moisture and other elements. The best I have found to use is PVC sheets. The last I bought were approximately 1/8 inch thick (3 mm). they can be sewn, glued, and formed with some gentle heat. Best of all, they are reasonably priced. I believe I gave 22 dollars for the last 4x8 sheet I bought about 2 years ago.
DanTwoLakes has some great tutorials that will provide a wealth of information for you also. I also really liked the Sid Chavers DVD on panels. Very well done panels can be made with a little foresight and initiative even if you don't sew.
Good luck, We like pictures
|01-04-2013 08:52 AM|
RodDoors Products still available?
I'm new to this site and have built street rods and trucks in past. Latest project is 70 C10 with a few mods and FB385 motor. Been looking to see if anyone bought out or is selling similar interior products like RodDoors used to.. I find their site suggests the economy took down another business And was hoping someone here could give me a alternative.