|08-03-2014 02:37 AM|
|BuzzLOL||. What ever happened to bygddy and this dual quad 383" engine w/ 244/244 cam? Still waiting on the video...|
|04-15-2014 03:59 PM|
|BuzzLOL||. Seems like only yesterday that '41 Willy's was leaving the factory here... LOL!|
|03-22-2013 12:22 PM|
This thread was posted a while back I don't see how I missed it, Nice Willys!
|03-22-2013 11:48 AM|
|Fang16||Slicks!? lol No room to carry them, even in my little trailer I pull behind my Willys. Old guy at the track told me one day, seen a lot of Willys on a trailer, never saw one pulling one! lol Running M/T street radials now. Maybe I'll get a car trailer and put some miles on my pick-up. lol Will take the fun outta drivin' to the track tho.|
|03-22-2013 11:14 AM|
Comp cams XR292R
Duration @ .050 254 intake 260 exhaust
Lift .582 .588
Edelbrock tunnel ram 2 x 750 Edelbrocks
Ported double hump 2.02/1.60 3891462 heads
3.90:1 ford 9"
Race weight 3257
80% Street/ 20% strip car
16 MPG at 75-80.
11.97 1/4 ET best to date. Just getting back into it at 63. Forgot a lot and have a lot to learn but having a ball doing it. I drive my cars. Vette, blown 350 29 Ford coupe and the Willys. Building a blown 350 for the Willys now. Poor old 98 Ford pick-up just sets there. lol Even drive to the track, 85 miles (Mokan) or 130 (Tusla). Thing is, have fun with what ya got. Some of the guys on here are very competitive and only do track time so their advise does not take the street into consideration.
|03-22-2013 09:31 AM|
Hope you'll do a video when you fire the engine up and post it here! I'd like to hear the sound of that cam/engine combo!
I'm putting together another tunnel rammed engine for my present project; a '63 Falcon gasser. Using a 454 with Weiand oval port tunnel to match up with the Edelbrock oval port heads, and twin 600 cfm Holleys. I put an 8.8" Ford in back with 3.73 posi, to make it more enjoyable on the street, but still make it run good at the strip. A Super T10 inbetween, just because I miss shifting a stick!
|03-22-2013 08:25 AM|
|BigMo||AHHHH !!! Nice, finally a hot rod with the TR setup....im putting together a pile of parts and such for the small block in my 30 Coupe, and after I get it broken in, im planning on that TR being thrown in...HELL YEAH.....nice headers, they Sanderson?|
|01-17-2013 05:43 PM|
|01-17-2013 06:59 AM|
|BuzzLOL||.. You may be getting close to maximizing the flow of the Weiand Street TR, since it's ports aren't that big, probably very close to those heads... and smaller ports than the Eddy Street TR uses... guess you can let us know how the ports match up soon...|
|01-11-2013 08:00 PM|
|01-11-2013 07:46 PM|
|01-11-2013 07:37 PM|
|01-11-2013 07:30 PM|
|BuzzLOL||.. LOL! The guys here tell me that 248/248 cam 'acts' a lot smaller than it is... so should be a good match up..|
|01-10-2013 05:20 AM|
|01-10-2013 01:24 AM|
.. Kinda surprised you went under 220cc heads with that 248/248 cam and a dual quad TR...
.. Also figured Profiler would have those heads on the truck the next day... looks like a smallish operation...
|This thread has more than 15 replies. Click here to review the whole thread.|