Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> 454 Tall deck??????
User Name
Password
lost password?   |   register now

Thread: 454 Tall deck?????? Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
07-31-2002 04:35 AM
skippasco a 79 454 out of a c30 truck is not a tall deck I think it is an excellent starting point for you. I would definetly trash can the heads and try to find an early 70's set. they are the large oval port and have open chambers I would put 2.19 intakes along with 1.88 exhaust and use 70 ls6 pistons they were designed for closed chambered heads but with the open heads they make about 9 to one which is plenty for today's gas. I like the performer rpm intake/cam set up for the street ,they makes tons of power under 6000 rpm you will also need a carb with about 850 cfm and I also prefer vacume secondarys unless you have a lot of gear and a stick shift
07-30-2002 02:39 AM
The Vandal The pushrods are also longer.........and as far as not being good blocks - they give you the opportunity to use a longer rod or use a longer stroke and still have a decent rod/stroke ratio. Because the decks are higher, the heads are further apart so a manfold made for tall deck (or spacers) must be used. You also must use a distributor for tall deck or one with an adjustable coller.

The Vandal
07-29-2002 08:46 PM
SirSpeedy Tall Deck blocks have a much higher deck hieght.

You can quickly identify it at the upper waterpump bolts. On a shorty, the distance from the upper waterpump bolt to the deck of the cylinders will by ~0.200", and the tall deck is ~0.600", The difference is 0.400"

The tall motors have longer rods, which produce more torque - not noted for revs.

I don't think the 454 was ever offered in a tall deck - the 366 and the 427 were offered both ways, but I think the 454 and all later Mark IV blocks are all short deck.

I'm no expert, but back in my muscle car days I do recall researching this topic -

Good Luck.
07-29-2002 07:29 PM
78 monte
454 Tall deck??????

Alright,what is the differance between a normal 454 and a tall deck 454???
Would a 454 out of a 1979 C30 be tall deck???
I've heard these aren't good blocks.Why not??
I've only owned S/B chevys,so I don't really know big blocks well.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 06:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.