Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> Modern Electronic Engines> 92 dakota and me not gonna have hair left
User Name
Password
lost password?   |   register now

Thread: 92 dakota and me not gonna have hair left Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
03-04-2013 12:23 PM
Soul_Hunter for what ever reason the books on MOPAR have a number of things that aren't right, and with bad info it can cause problems when trying to trouble shoot.
as LATECH said, the ASD relay also powers the fuel pump & the 2 second power up primes the fuel system.
the 2 second power up at the ignition coil is normal.
some will even give 1 ignition pulse at key on which can be quite a surprise if you happen to have the ignition coil wire off & are too close to the terminal when the key gets turned on.

with a decent scanner, there are a number of tests you can do that can be very helpful in trouble shooting such as triggering the ADS relay, injectors & ignition coil key on engine off.
i used a MT2500 for years which you can pickup now for cheap.
a good one may not be a bad investment.
just don't use a MT2500 trying to repair MOPAR ABS.
another problem i ran into with some MOPARs is using aftermarket sensors. i spent 2 days diagnosing a no start on a mini van caused by the A/M crank sensor we put in as a preventative measure during a trans O/H.
03-04-2013 11:11 AM
stroker_SS Very cool, I love seeing threads actually being resolved!
01-17-2013 06:24 PM
LATECH I cant say the 2 second power up at coil will hurt anything. It is not normal as I understand it. Could be something different in the PCM than what I am used to seeing. I cant honestly answer that.
The ASD relay powers the coil and fuel pump /injectors etc, the ECM controls it, I dont see it hurting anything.
If it is running I would not worry about it.
Glad it is burnin gas again.
01-17-2013 04:40 PM
Speedy60
IT's ALIVE!!!!

LaTech,
Thank you so much for you help. It is running now. Put in a another reman pcm, and it fired up. So I'm now backing out some of the parts .....sync sensor, coil, which by the way, had a 95 Cherokee in the shop yesterday, it uses same ignition coil, so hooked my original up and it ran fine.....So coil is not an issue...inspected my original crank sensor, it had some heat cracking in it, so left the new one in. I have one lingering question, knowing NOW what I didn't know before about this vintage Dodge systems... I am still getting a 1-2 second 12 volt pulse at the coil on key up... I don't want that to be what fried the original pcm, any ideas what to look for? Or should I worry about it? I thought maybe the pcm was getting some kinda sigbnal return from the sync sensor, so I unbunbled the harness from the pcm to the sync to make sure I didn't have a wire issue.. all is good... Now, I guess I get to use 2 or 3 rolls of electrical tape and put my harnesses back in order.... Fun Fun, Fun...
Again, thanks for your input...
01-14-2013 07:05 PM
LATECH Diamond wrecking has one 330-337-3556 $40 bucks. need to get service number from your to be sure

Nicklin Has one 519-822-0301
Route 51 auto salvage has one 724-677-4646
T+M has one 734-397-0000

If those dont match up let me know, I will look a little farther.
Diamond was the only yard in Ohio, the rest are out of state
01-14-2013 06:31 PM
Speedy60
Pcm

I did try to get a used part... Because I have heard nothing positive about reman pcm's, but sheesh, they want more for a used part than a reman is gonna cost me..
01-14-2013 06:29 PM
Speedy60
Things that make you go hmmmmm.....

Ok, so I finally got time to work on my project again. Pulled harness from 6 pin connector on drivers side engine to crank/distributor sensor, and all the tranny controls to visually inspect it. No damage visible. On the 5 volt side (pin 6) i get resistance reading to ground with the 60 pin disconnected until I unplug my vss (vehicle speed sensor). Then it drops to almost zero.... Soooo... I decided to plug the pcm back in, and try to start it with the vss unplugged.. No go.... I am still getting a 2 -3 second 12 volt pulse to coil and fuel pump on key up... And I am not supposed to get that... Anyhow... So I disconnected the 60 pin again to do more voltage tests... Guess what? The damn nut that holds the 60 pin came out with the bolt, and looking into the hole it left, there is mucho corrosion etc. falling outta the hole... I am convinced that I got a bad pcm outta the box....Will discuss this with the parts pro in AM, and have a new one ordered.... Will keep you updated....
01-11-2013 04:47 PM
LATECH Thank You and your also welcome. Let us know what it turns out to be as when you post , as you see, others read it and it helps anyone who needs it. Priceless stuff. Good Luck.
01-10-2013 07:40 PM
Speedy60
Wiring

Thank you for your input.. I will try these things Saturday, wifey told me I HAVE to take her to dinner tomorrow night. Gotta keep peace, ya know? I took on this project to keep me busy on the long cold winter nights here in Ohio, guess it's gonna keep me occupied longer than I anticipated......, I got hooked up on here after reading your help with the girl with same symptoms,,, Your help was extraordinary..... I work as a tech at an indie, I do mostly suspension, brakes and custom exhaust, fuel pumps etc. Your help is GREATLY appreciated. I will get back to you later....
01-10-2013 07:14 PM
LATECH You need to check each wire . Individually.
Unplug 60 pin and unplug the cam and crank sensors. Then put the black lead of DVOM on ground at engine and probe each wire to the sensors, voltage , return and signal leads, to be sure one of them isnt shorted. They should all read infinite.
9 volts isnt a problem, at least I dont think so. Each component has a tolerance factor or an acceptable amount of deviation from spec. Between that and test equiptment tolerance value, it could read 9 volts.
You can check it against another meter to be sure yours is accurate, or if not, at least how far off it is.
If the wiring checks out, I would have to lean back on a defective PCM from the get go.The coil circuit and its operational conditions you described are not right, and the function originates at the PCM.
Be sure you do not just have a bum coil. Try one off of a running truck, or bolt the one in question on a running truck.
01-10-2013 07:01 PM
Speedy60
Shorts,

No, if I disconnect the connector to the cam and crank sensors, circuit goes open, if I reconnect either one I do get an ohm reading, not at shop right now, cna't remember what exactly the reading was, but it was small....
01-10-2013 06:37 PM
LATECH Do have both the cam and crank sensor unplugged and have a continuity reading? Like less than 1 Ohm?
That will kill the PCM.
If that is the case you can do a wiggle test with an ohmeter hooked up, or split the harness open between the 2 and the pcm.Like the area over the exhaust would be a good place for the insulation to be melted.
It is obviously melted to something on another circuit that has a ground path from the harness, IIRC there is a ground at the firewall at the back of the enginetowards the pass side from center.Maybe it is melted there.
The harness will be grounded at a few places seperate from the PCM.Sounds like you do have a short.
01-10-2013 06:33 PM
Speedy60
Bad PCM

And I'm guessing that is why I have 9 volts to crank/cam sensor instead of the required 8? A bad PCM?
01-10-2013 06:31 PM
Speedy60
Bad PCM

I wondered about that also. I forgot to post previously, when I started this project, had no check engine light. After new PCM, had check engine light, and ASD pulled in, gave me fuel, and had spark for a few "try to start' cycles, with no start. Then, no spark. MY question remains, if pin 7 (crank/cam sensor) has an ohm reading to ground with 60 pin connector unhooked, would this take out a new pcm? Hate to try another one and have same result.....
01-10-2013 05:38 PM
LATECH Test light should not indicate power and ground at coil terminals when key is turned to on , like a fuel pump prime circuit on a GM.
The ASD is resposible for powering up the fuel pump, igntion coil etc.
IT only powers when the PCM turns it on, and that only happens while cranking or running the engine as it is turned on by the PCM when it sees a cam sensor pulse. The coil ground pulse that fires the coil only triggers with a crank sensor pulse throught PCM . It should never complete the ground path just by turning the system power on.It should remain in a non conductive state until the PCM recieves a pulse from the crank sensor to drive the ground pulse trigger in the PCM
Sounds like another bad PCM.
Also coil drivers in PCMs can sometimes pass enough current to light a test light but wont pass enough current to really drive an ignition coil.

Chrysler PCM s a re pretty junky. I have had them fail right out of the box.
Hard to find a good rebuilt one . Cardone sux.
This thread has more than 15 replies. Click here to review the whole thread.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 06:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.