Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Transmission - Rearend> 700r slipping rev and no 3-4 check ball question
User Name
Password
lost password?   |   register now

Thread: 700r slipping rev and no 3-4 check ball question Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
01-21-2013 04:34 PM
noobasaurus ok update forward shifts all work great but reverse is odd when I start it up in the morning reverse works ok but as the trans warms up I loose reverse and get it back when it cools down. Any thoughts?
01-14-2013 10:47 PM
rick 427 Based on the info you are giving,a missing or mis-placed check ball can cause all kinds of problems in any transmission,especially in a modified valve body application like you have,where a lot of the oil flow patterns are changed..If everything air checks good,on the bench,and thru the case with the valve body off, then I would put the checkballs where they belong,make sure the valve body gaskets are installed on the seperater plate correctly, not mis matched,and put it back in the car.
01-14-2013 07:50 PM
noobasaurus so one check ball can take out reverse 3-4 and a high 1-2?
01-14-2013 05:39 PM
rick 427 Double check the instruction sheet on where the checkballs go.., Put them exactly where they belong,and report back to us with the good news.
01-14-2013 01:29 PM
noobasaurus
700r slipping rev and no 3-4 check ball question

hi me and my dad are rebuilding the 700r in my 92 olds station wagon we rebuilt the 400 in our suburban and it works just great but this 700 is a maze lol. to my question we were having some issues with the old valve body so i got a tci cpv and it told me to remove all the check balls on the trans side so i did but when i did i put the two it wanted in there, back in the holders it asked but i put one check ball in the 1-2 check ball spot instead of 3-4 clutch right next to it and after putting it together i had a ok reverse then it started going down hill fast and i had to 3rd or im assuming 4rth gear can no check ball there cause this i also had a very high 1-2 shift like 31mph 3.5k rpm shift. could that ball have caused all 3 or should i be looking for another problem? we took it apart again and every set of clutch packs engaged with air and were like brand new, i really want to ride in my olds again ant help would be amazing thanks

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 08:54 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.