|01-19-2013 02:45 PM|
You will not find published flow numbers for a intake manifold and you cannot and shoulding build your engine
around a flow number anyways. if you want a flow number you will have to test for yourself.
Best tested while attached to the cylinder head you will be using- combined on the flow bench . Compare to other manifolds the numbers are interesting to look at but are not absolute. Don't worry this manifold flows big and will make big horsepower.
When you get your tunnel rammed motor project done, post your results.
|01-19-2013 11:54 AM|
eldelbrock street tunnel ram 7110 flow chart
Anybody have any flow numbers or other specs for a eldelbrock street tunnel ram model 7110? We don't need to get into all the different carb sizes etc just looking for some flow numbers for the manifold.