|01-22-2013 02:18 PM|
|01-22-2013 01:27 PM|
|01-22-2013 11:49 AM|
Chevy bellhousin' patterns are the Same...
|01-22-2013 11:45 AM|
1993 4.3 now carbed
which trans and componets will adapt as the 93 is externally balanced it had a 4 wheel dr trans when i got but the application has changed to street rod tks bl
|01-22-2013 08:29 AM|
Small world- I have by me as I type the same application distributor (#1110754), also w/lighter springs.
But "brand new"??
|01-22-2013 03:49 AM|
Surprised no one has said with you wanting to go carb,you have to change to a non-computer dizzy.This is a brand new re-curved one I have that never got used for a 4.3.PM me if interested.
|01-22-2013 12:51 AM|
which trannys and componets are compatable with a 4.3 1993 vortec
|01-21-2013 05:35 PM|
Now, heads w/a '95 casting date might still be OK, but it could also be a '96 production, and that would make it a "true" Vortec head. The Vortec head takes a totally different intake than the '95-back model year heads.
|01-21-2013 12:14 PM|
|BOBCRMAN@aol.com||4.3's can be a real problem with aftermkt intakes. From 1995 on there are several different intake/head configurations. The bolts don't line up.|
|01-20-2013 10:37 PM|
Edelbrock 2111 - Edelbrock Performer Intake Manifolds for Chevy Details
Chevy 200/229/262ci 3.8L/4.3L 90° V6
Designed for street 1985-95 Chevy 3.8L and 4.3L V6 200/229/262ci. Does not accept stock automotive carbs or 262 TBI unit. Dual bolt pattern water neck fits both automotive and marine applications (produced 18 HP more than older manifold design on 4.3L marine engine)
not like a 4.3 is rare,,,
|01-20-2013 10:28 PM|
|bernard landry||just about dosent work|
|01-20-2013 10:23 PM|
|vinniekq2||just about everything can be carbed|
|01-20-2013 10:09 PM|
hi can a 4.3 1995 vortec be carburated tks bl