|01-27-2013 07:33 AM|
sbc in a Z
i have seen them done.. look awsome and fast.. got a friend that did a opal GT with a 502 fuel inj'd engine.. i think the rear tires are bolted to the 3rd member, he's running 20" wide tires. of course its tubed..
|01-26-2013 03:36 PM|
Scarab made a kit. Many people abandoned this project before completion.
I knew someone that did a 88-92 RX7. Not sure the year. It was boxey. Converted to a 350 SBC torquer 2 low rise intake , and a T5. It needed a hole in hood with a scoope.
|01-26-2013 10:28 AM|
I have a Sbc in a 72 celica. My old motor had a performer intake on it and the stock hood closed no problem. I just built a new motor for it with a RPM Air gap intake. I just order a 2.5" glass cowl as my hood won't close know.
I know its not a datsun but it is a small import. Thought It might help.
|01-25-2013 07:12 AM|
|joshp83||thanks checking it out now|
|01-24-2013 07:49 PM|
all the info you'll need on swaps.
|01-24-2013 07:32 PM|
|joshp83||my supra ran good and there heavy|
|01-24-2013 07:09 PM|
|vinniekq2||The local Datsun here was a N.A. engine with a turbo installed later. I was surprised how fast it is.I think I would worry a little if he was beside me|
|01-24-2013 06:57 PM|
|joshp83||thanks i actually thought about a na supra swap since i have a totaled 91|
|01-24-2013 06:53 PM|
|vinniekq2||Where are all these Datsuns coming from all of a sudden? We have a new one in my neighbourhood with a toyota supra turbo engine.Even it required a little scoop. Let me know if you find a solution,and have fun with this car.|
|01-24-2013 06:47 PM|
sbc in 280z
has any one fit a sbc with a victor or performer rpm intake under stock hood of a datsun z car