Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic -- Hot Rod Forum

Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Transmission - Rearend> 46 Rh questions
User Name
lost password?   |   register now

Thread: 46 Rh questions Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Please select your insurance company (Optional)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
01-27-2013 12:41 PM
FabioV8 Ok, I'll do the tests, so I think that the 4th I will use little
01-26-2013 03:06 PM
LATECH IIRC it will work, but it will shift to 4th right away if left on, as third gear has a switch that closes to complete 4th gear circuit in trans.
Check wiring diagram to be sure, I think that is how its setup.
01-26-2013 01:04 PM
FabioV8 Ok thanks a lot,
my jeep use only in the off-road can not circulate in the street,then the lock-up I do not think I need, I do not care save fuel, and then I would make a system as simple as possible, I could put a switch just for the 4th, it's a bad idea?
01-26-2013 09:25 AM
LATECH The vacuum switch is adjustable. The pressure switch for the side of the trans is not.
If your gearing/tire size/final ratio is outside the parametrs of the switch you can get a pressure switch at NAPA for the correct pressure.
They have a wide selection, but you need a good counterguy, so dont go to McParts for it, Go to NAPA.
We used a 62 PSI switch because the 52 PSI at PTC was to Low as the rear gear was a 4.10.
The vacuum switch is good as it is throttle inclination sensitive. cruise(vacuum high) it holds, when the throttle is opened Vacuum is dropped and switch changes states(continuity) there are both normally open and normally closed contacts on the vacuum switch. Plus it is adjustable as If you have a big cam you can tailor it to your driving habit.
01-26-2013 09:20 AM
LATECH The kit does work and I have installed it on a 89 Dakota 5.9 w/518

It is a matter of tuning it to work.
01-26-2013 06:42 AM
FabioV8 I had already seen the site PATC, there is this kit:

Dodge 727 Transmission Swap to 518 Transmission from PATC, 46RE 47RE 48RE

says that it works only with stock tire size and rear end ratio, I will use 37 tires and different transmission

I think this kit does not work
01-24-2013 06:17 PM
LATECH X 2 with josh. PATC is the place. It has the parts and some tutorial info to help you out.
01-24-2013 06:15 PM
pricesgarages check with PATC they sell a kit for them
01-22-2013 10:50 AM
46 Rh questions

I have a Land Rover Defender 390 stroker mopar engine and transmission 46RH that use only in off-road,I redid my 46rh using a kit Trans-scat in Heavy Duty model


my engine does not use an original ECU, and no longer manages the lock-up and the 4th, how can I manage them? I can put two external switches?
the lock-up must operate only when I trigger the switch on the 4th?

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -6. The time now is 03:49 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.