Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Hotrodding Basics> Gen 1 flywheel on LSx/LM7 - Anything wrong with this logic?
User Name
Password
lost password?   |   register now

Thread: Gen 1 flywheel on LSx/LM7 - Anything wrong with this logic? Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
01-26-2013 03:26 PM
lmsport Tilton makes a flywheel,51-4473, and starter,54-10012, for the 153 tooth LSX, but is for use with a 5.5" clutch. They can probably provide you with a modified part for your app.
01-25-2013 10:35 AM
S10xGN The flywheel will be less of an issue than a starter motor that fits. Good luck finding that!

Russ
01-25-2013 10:01 AM
mikebuongiorno Thanks for the reply. I believe gen3 is internally balanced and I haven't been able to find a 153 tooth anywhere online drilled for the metric gen 3 flange/bolt pattern.
01-25-2013 07:38 AM
bondo
Quote:
Originally Posted by mikebuongiorno View Post
Evening gang,

Can you put a Gen1 flywheel on a Gen3 engine? The answer is no. But can you if you really want to? :-)

Here is why I really want to. The gen3 flywheel is 14" diameter (168 tooth), the gen 1 is 12 3/4" (153 tooth) My bell housing wont fit the 14", and changing my bell housing is not an option (will explain further down).

Also, have read that the crank flange on LSx is 0.4" closer to the block than gen 1, that means that I've got to get my flywheel off the flange that amount to engage my input shaft correctly.

So here is my plan, please let me know if I'm missing something:

-LSx motor crank flange
-(3) of these shims (gets me 0.36" of the 0.4" I need)
Competition Engineering 4047 Competition Engineering Flexplate/Flywheel Shims
-My 153 tooth gen1 flywheel re-drilled for metric / LSx bolt pattern

Seems to easy. Am I missing something?

I'm building a mid engine corvair and am using a special bellhousing / adapter from from block (LM7 - actually LM4 /alloy) to corvair diff to saginaw in that order where the back seats were.

Here is where I got my input on the hurdles. Thanks!

Engine and Transmission Swap Gen III - Car Craft Magazine
Ayuh,.... Chevy has pretty much Always offered a 153 tooth, 'n 168 tooth flywheel, 'n I believe, still does...

It's much easier to find the Right flywheel, as the balance will be Very different doin' it yer way....
01-25-2013 12:16 AM
mikebuongiorno
Gen 1 flywheel on LSx/LM7 - Anything wrong with this logic?

Evening gang,

Can you put a Gen1 flywheel on a Gen3 engine? The answer is no. But can you if you really want to? :-)

Here is why I really want to. The gen3 flywheel is 14" diameter (168 tooth), the gen 1 is 12 3/4" (153 tooth) My bell housing wont fit the 14", and changing my bell housing is not an option (will explain further down).

Also, have read that the crank flange on LSx is 0.4" closer to the block than gen 1, that means that I've got to get my flywheel off the flange that amount to engage my input shaft correctly.

So here is my plan, please let me know if I'm missing something:

-LSx motor crank flange
-(3) of these shims (gets me 0.36" of the 0.4" I need)
Competition Engineering 4047 Competition Engineering Flexplate/Flywheel Shims
-My 153 tooth gen1 flywheel re-drilled for metric / LSx bolt pattern

Seems to easy. Am I missing something?

I'm building a mid engine corvair and am using a special bellhousing / adapter from from block (LM7 - actually LM4 /alloy) to corvair diff to saginaw in that order where the back seats were.

Here is where I got my input on the hurdles. Thanks!

Engine and Transmission Swap Gen III - Car Craft Magazine

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.