|01-29-2013 08:31 AM|
|DanTwoLakes||Whatever, the principle is the same. That's just how that particular seat cover manufacturer made their welts.|
|01-29-2013 01:02 AM|
|Coodeville||This piece is made from vinyl.|
|01-28-2013 04:11 PM|
|DanTwoLakes||It is made that way because that leather welt is heavy, and on an inside corner if the welt just had straight cuts, it could overlap itself and make a bulge. This way you can sew it to an inside corner or an outside corner and it won't overlap itself. That was sewn on a dedicated machine that sewed the welt and had a cutter to make those round notches. There are all kinds of dedicated machines in a sewing plant that only do one operation. The parts of your Cadillac seat from that long ago would probably have had the edges of the seat parts run through a serger which would have cut off some of the fabric and made an overlock stitch on the outside edges as it sewed the leather to the sew foam underneath.|
|01-28-2013 02:55 PM|
|killeratrod||I would think it is when they make it not to bind in the machine, also this helps when you sew it in.|
|01-28-2013 02:37 PM|
|Coodeville||That, I know - but why do they go through te extra step of making it so big ?|
|01-28-2013 02:33 PM|
|killeratrod||made that way to go around any curved areas and not kink up.|
|01-28-2013 02:13 PM|
Original Welt ?
Here's a photo of some original welt from a 1970 Cadillac. Why are the relief cuts made like this and not just regular cuts ?