|01-30-2013 01:02 AM|
|327NUT||Hard to say about the clearances but the Buick and Chevy share the same exhaust port configuration. I don't know how close the ports are off but with some good fabrication you should be able to change out the flange. Make sure you buy 3/8" thick flanges though, more material to weld to and less chances of warpage. You can find the flanges on ebay, I bought a nice set of 3/8" for $45...shipped.|
|01-29-2013 07:11 PM|
Header flange change
I got a buick 350 which im about to take out a put a sbc motor in i wanted to know if i could use my buick headers if i change the flage to a sbc so i wouldnt have no issues with clearance on the motor swap.