|01-30-2013 06:44 PM|
|vinniekq2||Us e traction bars for a street car. A lot of people dont know how to drive with ladder bars,they are not very forgiving if you chop the throttle at high speed,especially on slicks|
|01-30-2013 06:15 PM|
|01-30-2013 04:43 PM|
Mostly 1/4 mile passes...but a street cruise now and then
|01-30-2013 03:34 PM|
|big gear head||Is it the right width for your truck? Do you want 4.88 gears? If it has a spool then it't not going to be worth a crap on the street. Ladder bars are noisy and stiff on the street. If it's what you want then the price isn't too bad. What are you going to do with the truck?|
|01-30-2013 03:30 PM|
Thats kinda what I was thinking. I've got an opportunity to buy a narrowed 12 bolt with 33 spline Strange axles ...ladder bars...billet yoke... aluminum cover...4.88 Richmond gears... all new for 1250.00. Good deal?
|01-30-2013 03:18 PM|
|big gear head||Not a chance. That rear end will blow apart pretty quick if you get any traction at all.|
|01-30-2013 02:47 PM|
Its in a 91 GMC s-15 Stock rear end with posi carrier out of a 94 camaro z-28. 400 trans with 3800 stahl, 383 stroker with 546 hp
|01-30-2013 02:26 PM|
|rick 427||And whats it going under...car,truck,cement mixer? whats it's intentions, street,strip?.transbrake?. Is it going to see slicks?What axle's?. Is there a c-clip eliminater kit in it?|
|01-30-2013 02:11 PM|
|BOBCRMAN@aol.com||There are several 10 bolt rears. What do you have?|
|01-30-2013 09:19 AM|
Durability of a 10 bolt posi?
I am wondering if anyone can tell me the limitations a 10 GM posi with 4.10 gears has. I've just completed a 546 HP 486 lbs of torque 383 stroker and question if the rear end I have is going to be able to handle it. Any thoughts?