|02-21-2013 07:07 PM|
I did that a couple of weeks ago, but now I need more.He's a really nice guy but I feel like I'm bothering him. Already need to ask for more of the 1/8 closed cell foam. Would prefer to buy it from a re-sale place.
I have found a foam shop that buys from a company that has a glue that seems to be correct, and they have agreed to bring in a gallon for me. Just have to go in and pay for it first. Hopefully it'll do the job:
JAXON AUTO TRIM AND MARINE TRIM CEMENT
Clear, sprayable synthetic elastomer developed especially to permanently
adhere Landau tops. Provides a waterproof, heat resistant, non-staining
bond on any common surface found in the automotive trade. Use cement to
adhere vinyl tops, fabric to foam, headliners, door panels, carpets and
more. Works on marine applications. To thin or clean use S 8427 solvent.
Available in 3.78 litre and 18.9 litre pails.
|02-21-2013 06:22 PM|
|02-21-2013 04:41 PM|
|crownver||So I tried to order a gallon of the glue from AHTurf. The order was accepted, and then received an email it was backordered. Waited 2 weeks and finally phoned them. Girl on the phone couldn't find the order. Just recieved an email apologizing and saying the order had been canceled and refunded because they can't ship across the border. I'll keep looking for a Canadian supplier.|
|02-06-2013 11:56 AM|
|crownver||Got an email from ahturff today. The gallon of glue is backordered. 10 days before they ship. Starting to think they are having second thoughts about shipping across the border.|
|02-05-2013 12:03 PM|
OK, I went through the purchase process for the glue from AHturff and it came up shipping via UPS ground for $38. Best so far at $59 total, but I'm pretty sure if I complete the order I'll get an email saying they can't ship to me.
What the h, I'll give it a try and let you know.
|02-05-2013 11:53 AM|
|crownver||Problem is for the glue is that they can't ship it across the border. Has to originate in Canada.|
|02-05-2013 06:01 AM|
Try "ahturff.com" for the dap glue .
And "your auto trim store" for the gun
|02-02-2013 05:14 PM|
|crownver||Well I googled EZE spray and it cost $30 but the shipping is $38. I wish I could find Dap here. Only thing so far is Jefbond 3000 at $62 plus $25 shipping. Ever heard of Jefbond?|
|02-02-2013 09:01 AM|
i've had the same glue gun for 4 years, i've never cleaned it.
it is an old siphon gun that was discarded by a painter friend of mine
i pulled the vent hose off the canister vent and plug it with a pop rivet
|02-02-2013 07:10 AM|
google EZE spray glue gun . you will find them for about $20 to @25 , get the one with the plastic cup . The glue doesnot stick to the plastic so if it hardens in the cup you just grab it with plyers and remove it .
And as for spray cans @ $10 a can and a gallon of Dap @ $22. Its a no brainer .
|02-02-2013 06:30 AM|
|02-02-2013 12:28 AM|
|BOBCRMAN@aol.com||lacquer thinner or acetone is what I use.|
|02-01-2013 08:55 PM|
Yeah, I know about the rattle can glue. I can get 3M 80 which is supposed to work, but at $33.00 a can, I can do a lot more for the money with a spray gun. Also, according to DanTwoLakes, gun spraying is the best way. I'm going to try the little Husky gun and see how that works. The glue I have is designed to be sprayed, so hopefully it works. Be a few days until I get to it though. Working on cab corners at the moment.
I thought I could use mineral spirits to clean the gun?
|02-01-2013 06:32 PM|
Rattle can glue will work if it is the right kind 3M #77 is NOT the right kind. 3M makes several hi-strength glues in rattle can. Look ofr hi-strength and hi-temp. Short of that any cheap spray gun will work but don't expect to get a good spray pattern out of it. Most you hope for is a slurry and the gun must be cleaned with Xylol or it will become useless in no time.
|01-31-2013 07:39 PM|
Princess Auto is a lot like "Horrible Fright".
If a ceiling texture gun would work - they can be had cheap in lots of places
|This thread has more than 15 replies. Click here to review the whole thread.|