|02-06-2013 04:53 PM|
|02-06-2013 04:26 PM|
|T-bucket23||Generally coils burn due to over current due to bad connections or a charging system that is not functioning correctly. You dont have anything but the MSD box wires connected to the coil do you. This is a no no with MSD|
|02-06-2013 01:22 PM|
|02-06-2013 10:25 AM|
|33Willys77||What type of plug wires? Orange wire from box to + on coil and small black to - on coil. Should need nothing more on the coil. Solid core wires can not be used with MSD. Are you sure the coil is going bad or maybe a relay not working right in the box? Did you do the testing MSD suggests to find the problem?|
|02-06-2013 08:18 AM|
|02-06-2013 06:57 AM|
smoke testing coils
ck your info on the dizzy. u may need a ballast resistor.
|02-06-2013 12:32 AM|
We need a lot more information than that.
When does it happen, what vehicle, system, distributor, which MSD box, how's it wired, etc.
|02-05-2013 08:29 PM|
msd ingintion components
don't understand what I may of be doing incorrect, keep burning coils.