Hot Rod Forum banner

Choosing Gears To Go With A Magnum 280h Cam

6K views 10 replies 2 participants last post by  the82elco 
#1 ·
I have a mild built sbc 350 which rear end gears should i go with :confused:
 
This post has been deleted
#6 ·
if you have the cam , and it's installed, 373's and 26"tall tire..
the stall is a tad low even for the 270mag..

I years ago ran a comp 292 magnum cam in a vehicle with a 2400 stall and 273 gears and 28" tires.. it was fun at 100+ the cam came on hard at 95mph..
:drool:

2nd gen t/a's float around a lot at 120+:D 135+ they are down right scary
 
This post has been deleted
This post has been deleted
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top