|10-30-2003 06:38 PM|
|TooMany2count||I have read posts on other forums stating that some guys are putting 502's in S-10 trucks & are using the stock springs. Cant tell you what forums but it you do a search on the web I'm sure you'll find some of the posts.........joe|
|10-30-2003 05:16 PM|
Front Coil Springs
Installing a 305 into a 1988 GMC S-15 truck short bed. Started out as a 2.5 with auto trans. Plan to keep it as an automatic but switch shifter to floor. I figure the 4 cylinder springs would be to weak. So, what about it, 4.3 liter V-6 springs that is.
Thanks for any advice given.
|10-22-2003 04:55 PM|
|firstname.lastname@example.org||What kind of car?|
|10-11-2003 01:05 PM|
You can try asking in the suspention forum on
I don't think anybody has ever asked that question before.
|10-10-2003 10:50 AM|
4.3 V6 Coil Spring Rate
Looking for advice on the coil spring rates for a 4.3 V6 set-up. Where could I find this info.