|02-21-2013 01:54 PM|
What RPM is idle ATM ?
What cam ATM ?
|02-21-2013 01:35 PM|
There is not one part in any engine that equals the sum total of the parts matched together.
THE TRUTH ONE MORE TIME IS WHAT YOU ARE DESCRIBING IS A POSER CAM!!.
|02-21-2013 01:14 PM|
The guys who give wild HP figures were not alive in the 1970s or they would not make claims like that.
The baddest Corvette of them all was a 1967-1969 L88 427 CI Corvette and it was only rated at 430 HP at 4,000 RPM. . In production trim, the L88 engine had 450-500 HP on racing fuel at 6,000 RPM. Due to insurance and emissions standards, the L88 package was cancelled in 1970
1/4 mile: 124 MPH 11.50 ET
|02-21-2013 10:07 AM|
|02-21-2013 09:16 AM|
|s10streetrod||It has a mean loap but I want more loap I haven't had it on a dyno yet the Guy that built the motor said it was pushing 450 to 500|
|02-21-2013 02:41 AM|
Woooow, really. A 350 making 450-500 will have loads of lope. Unless you spraying a 300 shot. If your 350 isnt loping the slightest, it aint making those hp numbers. Sorry bud
|02-20-2013 10:52 PM|
If your engine is making 450 - 500 horse power,it will already have an awesome lope.
what parts are in the engine? what manifold,carb,headers,CR?heads?
|02-20-2013 10:33 PM|
|s10streetrod||I ment cam not can|
|02-20-2013 09:43 PM|
I built a s10 with a 350 engine running around 450 to 500 HP its my every day driver I want to. Put a different can in it that has a awesome big lope in . it what is the best suggestions on what kind of can I should get? And I'm new to this site this is my first post so go easy on me lol