|02-25-2013 02:53 PM|
Thanks for all your help.
I am in Australia so I assume the AOD's put in local V8 Falcons from 88 to 93 would be the same as used in US Mustangs from the same era.
Are there any distinctive external features to look for in the correct AOD
|02-25-2013 12:39 PM|
Actually a fellow can get on craigslist and find a late 351 with an AOD attached from a donor and transplant the thing hide fur feathers an all into the wagon without a great deal of difficulty and have the efi and all that..Look for pickups with 2wd when you are looking..and find a good runner..Much more economical to do it that way..
|02-25-2013 12:03 PM|
|JeffB||Only use the donor AOD's I posted above the earlier versions are problematic and should not be used.|
|02-25-2013 04:27 AM|
I'm interested in the AOD trans option rather than C4. I've found one that supposed to fit a Cleveland. Will this bolt up to a Windsor with no modifications?
|02-25-2013 02:00 AM|
Will the AOD bolt straight up to the Windsor block?
|02-24-2013 05:34 PM|
Check out Jeffb's info about the other 59 today.
|02-24-2013 05:33 PM|
|02-24-2013 05:30 PM|
|hpete||I'm not positive about this but I'm pretty sure that Ford didn't change the full size frames very much between 57 and 64. The 63 and 64 models could be had with the 260 or 289 v8 motors. So you should be able to do this with factory mounts.|
|02-24-2013 02:55 PM|
|vinniekq2||That looks like a great project,nice score.Maybe get the thing running if possible,fix glass and see what comes next.Just driving that car would be a rush,|
|02-24-2013 02:53 PM|
|chrisfoster1959||And another photo|
|02-24-2013 02:52 PM|
|02-24-2013 02:49 PM|
I haven't purchased the 351 yet. Looking for a C4 auto as well.
I've not tried to start the car - it was purchased as a non runner.
I've attached a couple of photos
|02-24-2013 10:04 AM|
|vinniekq2||do you have a 351? can you weld?Are you staying with a standard transmission?Is the 6 cylinder engine dead? do you have any pictures of the car?|
|02-24-2013 12:56 AM|
351 Windsor into 1959 Ford Ranchwagon
I'm looking to put a 351 Windsor into a 1959 Ford Ranch Wagon.l'll need engine mounts.
Can anyone tell me where I can get engine mounts to suit
Also, what will I need to do with the rear cross member. Is the original easily adapted or do I need to get an adaptor of some sort?
It is currently a six cylinder, 3 speed manual