|03-08-2013 03:59 PM|
|cobalt327||I have a relatively cheap OTC puller, works fine. You can borrow one from many parts stores by leaving a refundable deposit if this is a one-time deal.|
|03-07-2013 04:52 PM|
It depends on the design of the pulley. Most of the pulley removal sets from HF or an auto parts store have a variety of pullers for different types of pulleys, so they cost a little more. However, if all you want to do is remove a pressed on GM pulley from the 70's and 80's, you can also use this type of puller Performance Tool W80653 1 or 2 Groove Pulley Puller .
|03-06-2013 10:07 PM|
|BOBCRMAN@aol.com||I have been using a HF unit at the shop for five years!|
|03-06-2013 02:17 PM|
Power steering pulley puller tool
Any recommendations for buying a "POWER STEERING PULLEY PULLER TOOL"?
Specific brands or tool type(s)?
Application: Small Block Chevy