|03-22-2013 01:16 PM|
|garyroushkolb||No harm , no foul.|
|03-22-2013 10:27 AM|
Second time (http://www.hotrodders.com/forum/cnc-...ml#post1658933, posts 10-13) someone has mistakenly thought I was calling THEM out when I wasn't. Time for me to stop responding to spammers in a post!
Anyway if you'll notice, the spammer (matusgreats) was quoted in my post above. His original post containing the spam has been removed. It had nada to do w/you!
|03-22-2013 04:56 AM|
|garyroushkolb||I hope you were not talking about me being a spammer!|
|03-22-2013 01:57 AM|
|03-21-2013 08:59 AM|
I use one of harbor frieght's small cleaners with their cleaning solution Item #91593
This works very well on cleaning blower bearings. The stuff costs $5.99 and you only use a little of it at a time so you can always have clean solution for the final clean.
|03-21-2013 12:30 AM|
Often a alkaline cleaner like Black Maxx diluted to the needed strength works well- but the metal being cleaned should not be aluminum or magnesium, or painted.
|12-31-2011 05:46 PM|
ultrasonic cleaning solution
are you able to use these in ultrasonic cleaners?
|12-31-2011 01:14 PM|
oily parts cleaner
I use Gunk engine cleaner and a tooth brush size wire brush or tooth brush. It comes off with water. Great stuff.
|12-30-2011 05:51 PM|
|cobalt327||For a large car parts cleaner (that's a hell of an ultrasound unit, BTW) I agree w/using one of the alkaline cleaners. Not for aluminum or alloys or painted surfaces. Cheapest is either the super concentrated "Black Maxx" from NAPA (one fluid ounce- about 10¢ worth- to a quart of water equals the strength of the average bottle of 409 or Fantastik, etc.), or driveway cleaner sold by many parts stores. This is a 409-type alkaline cleaner, but more concentrated and w/o any perfumes or pretty dyes added to appease housewives.|
|12-30-2011 08:15 AM|
I like using purple power like mentioned above.
|12-28-2011 07:20 PM|
I use Purple Power degreaser (generic castrol super clean) in my solvent tank
it has some acid in it, so you need to use a little care with aluminum
you can get it in 1 or 2.5 gallon jugs, at wal mart, pretty cheap
|12-28-2011 06:55 PM|
|garyroushkolb||I've got a large tank cleaner that I clean blower bearings in and would like to find something else also. i currently use water with dawn dishwasher soap. I preclean the bearings in solvent first.|
|12-28-2011 02:59 PM|
Ultrasonic Cleaning Solution Recommendations
I just got a ultrasonic cleaner and I am looking for a good cleaning solution for oily engine parts. Home made or from a store. It doesn't matter as long as it works.