|03-27-2013 09:52 PM|
|03-27-2013 06:48 PM|
I agree with Dan, or scour the wrecking yards.
|03-26-2013 08:10 PM|
|DanTwoLakes||If you have the slide mechanisms already on the seats and you can weld,you can easily make your own brackets to mount the seats on for far less than you'll pay for universal ones. Give it a try.|
|03-26-2013 05:36 PM|
|sedanbob||Wise Guys sells risers and sliders separately - they can be bolted together or used separately. Summit Racing sells them, I would guess Jegs and Speedway probably do too.|
|03-26-2013 04:35 PM|
Bucket seat mounting
I'm working on a 1928 Nash street rod. The previous owner/builder was a bit short in stature, and built very high risers to mount the seats on. My plan was to remove them, cut them down, then weld them back together and remount them. After getting them out, I realized I can't reuse them. They look awful, and I'm not going to put them back in. I have no idea when the seats and slider mechanisms originally came from. The seats bolt to the original sliders, which were in turn bubble gum welded to the risers. Since the seats are in great shape and already upholstered to match the interior, I'm going to reuse the same seats. My question is, who makes a nice universal slider mechanism I can bolt back onto the seats? Something with 2-3" of rise added is fine, or something with no rise, and I can fab up some low pro risers. I've seen many online, but I've never handled one, so I don't know who makes quality, or who makes something I can use.