|04-11-2013 05:17 PM|
|04-02-2013 07:04 AM|
|sedanbob||Mine has pins on the hood side that fit into a bracket attached to the apron. A small tab that hooks over the apron would work - you'd probably want to add a something to cushion so the side doesn't rub the apron and the clip doesn't rub the inside.|
|04-01-2013 02:43 PM|
I put a piece of metal on the inside of the panel that slips over the lip that comes up from the fender, it works very well.
|04-01-2013 01:32 PM|
'34 ford - Fastening the hood side panels at the bottom
Getting ramped up for a new Outlaw 34 Ford coupe build. I've got the hood (smooth sides, no handles) from Rootlieb already.... It occurred to me... I haven't got the slightest idea of how I'm going to fasten the lower edge of the hood to the car.
It's a 3 piece hood and the top will hang on Hagan hinge rails. The bottom of the side panels.....?????? I've never looked that closely at other's cars.
How did you do it?