|04-05-2013 10:16 PM|
|Claude OD||Thanks. Am going to the Charotte Auto Fair tomorrow. Will see what I can find.|
|04-05-2013 04:45 PM|
easyest way is listed above..
but you'll need to get the angled shims to get the pinion angle correct..
many vendors sell them for these truck(aka nascar )
I made blocks.. with 2.5" 1/4" thick square tube
|04-05-2013 04:35 PM|
Same rear suspension as your 69, with springs from a Jeep TJ in the back. clipped 1.5 coils in front. Should get you close to your requirements.
|04-05-2013 04:12 PM|
69 c10 rear coil spring lowering
I ahve a 69 c10 short bed step side with coil springs. Want to lower it 3 inches in back...The front is already lowered. Can I just buy 3 inch lowering coils and install them?