|04-15-2013 09:48 PM|
|cobalt327||Here is an article on using JD BB paint.|
|04-15-2013 08:34 PM|
|Cape Cod Bob||John Deer blitz black. Doesn't scratch easy, gas won't lift it but will leave marks so be careful' Cleans up with glass cleaner. Comes in rattle cans with a spry gun type tip. about $10 a can.|
|04-15-2013 07:16 AM|
Did I miss where on the vehicle this is going to be used?
IMHO, a satin or "semi-gloss" type finish is much preferred over straight flat or gloss black for underhood sheetmetal, firewall, accessories and brackets, etc.
On my Camaro underhood and A-arms, etc. I used enamel (Centari w/a flattener). IIRC GM is supposed to have used 60/40 in the muscle car years, but it looks a little too flat to me, we ended up about 75/25. This shot excellent- I'm a rank amateur and even I couldn't screw this up.
In looking around the interweb, SPI gets very high reviews. Combine that w/the assistance you can get here, that would be my choice I do believe.
|04-15-2013 05:37 AM|
SPI Flat black polyurethane single stage test panel photos when mixed 4:1 and 8:1
|04-14-2013 06:00 PM|
|04-14-2013 05:21 PM|
Here's a shot of the SPI right after 3 coats, walked outta the booth and the next moring it was @
a 50% low sheen.
Lookes like silk.
Did a test panel 3 day B4 and threw a lacquer thinner soaked rag on it for 15 minutes
and it didn't do anything to it.
This Spi is the best product on the market, and I've shot them all in my 45 years of painting.
Price is xlnt also.
|04-14-2013 05:01 PM|
|Old Fool||SPI makes a great matte clear too|
|04-14-2013 09:16 AM|
I've used both, and the urethane is much more permanent. I like to do things one time, and never have to worry about it again.
|04-14-2013 07:48 AM|
|dumbasastump||the last time i used lacquer i was painting my dinosaur while listening to an 8 track tape|
|04-14-2013 05:01 AM|
Shot the SPI Flat black @ the 4 to 1 mix ratio.
Lays down like silk and is bullet proof.
Best on the market IMO
Won't ever use a flattened clear again.
|04-13-2013 02:34 PM|
|cutthroatkid||I got ya I thought the picture wasn't showing up.I was hoping the single stage would lay like what I'm spraying now.|
|04-13-2013 01:54 PM|
|04-13-2013 01:38 PM|
|cutthroatkid||what do you mean nothing there?What's a matter with this way?|
|04-13-2013 01:30 PM|
Bc/cc with a satin clear is the ONLY way I would do an exterior flat color.
|04-13-2013 12:50 PM|
|This thread has more than 15 replies. Click here to review the whole thread.|