|05-10-2013 12:45 PM|
|496CHEVY3100||Are you using the one that screws into shifter or the one that attaches to a shifter rod ,the one on the rod seems to work best ,can be used for NSS or back up lights.|
|05-10-2013 10:55 AM|
lokar neutral safety swith.
I to am having trouble adjusting the safety switch on the Lokar shifter. Not happy with it at all. I have tried their way and all kind of ways does not work. However, I can make it work it will take me modifying the shifter so that it will work, it will start in Park and Park only. Lokar makes a good quality product but the neutral safety switch adjustment for a 700R4 does not work. I came here to see if there was an answer. I see I am not the only one who has a problem.
|05-07-2013 07:25 PM|
|05-07-2013 07:19 PM|
|RatPin||I remember the spacers that go in the holes on the side of my 700R4, but I don't remember any set screws. I will have to check.|
|05-07-2013 07:16 PM|
|05-07-2013 07:04 PM|
|RatPin||Which spacers are you referring to?|
|05-07-2013 06:56 PM|
|04-23-2013 07:41 AM|
There is no problem with a Lokar shifter and the NSS there are literally thousands in use around the country. I totally agree with IrelandsChild, get real you just screw it in and its done, check its operation and its good to go.
|04-23-2013 07:12 AM|
Write to Lokar. That's what I've done, although I've had no reply as yet. I don't expect anything from them, only that they address this evidently very common failing of their design. It's inexcusable.
|04-22-2013 08:52 PM|
Sorry about your accident. Cars can be fixed though. I also have a trans mounted lokar and no matter how I adjust it it will start in P, N and OD. Obviously it's not good to have it start in OD, but I am aware of it and I'm the only one who drives it. Only time the key gets turned is with me sitting in it with a hand on the wheel and a foot on the brake. It is on my list of things to address eventually, but it is a ways down the line.
I read a post somewhere about somebody installing a very thin shim between the switch washer and the mounting boss. I tried it but then it would not start at all. Maybe it wasn't thin enough.
|04-20-2013 12:58 PM|
Oh, So that's what happened to the first one.
Mr. Crosley, Just trying to make my friend Brian feel better about the whole situation by injecting a little humor. My original post was not technical either, so you can delete it too.
|04-20-2013 12:27 PM|
|Crosley||Tech forums are for posts with tech items. Non tech posts are removed|
|04-20-2013 08:39 AM|
I'm already able to laugh about it, although there WILL be a picture of it on my "wall of pain", and there will never, EVER, be another Lokar product in any of my cars. I fully accept responsibility for turning the key while not being behind the wheel, but I accept no responsibility for the nss not working. These need to be bullet proof, idiot proof to install, and should require ZERO maintenance.
|04-20-2013 06:53 AM|
Brian, Shh.............it happens, if you laugh about it, the pain will ease. Made me think about the time I nearly knocked the door of my old camino. Add it to the Faux Pas thread. Nolan
|04-19-2013 10:32 PM|
|junkyardjeff||It sucks that it happened but do you have a working parking brake,I make sure they work on all of my vehicles and is used when parked.|
|This thread has more than 15 replies. Click here to review the whole thread.|