|04-23-2013 08:39 PM|
heads are sold,
still have a dart intake, and why I was looking at the 305afr
be one less part to buy, when I go efi I'd be able to use it..
oh well.. change direction..
as far as budget.. haha thats zero.. almost.. just cash from the sale of heads, tho. I didn't do bad there bought in '02 for 1500.oo and sold for 2200.oo the other day
|04-23-2013 08:07 PM|
I don't know what your budget is but it seems that with an intake and carb and Efi swap you're getting ready to drop some serious money. If it were mi e I'd use what you currently have and go to a good Efi system first. No it is not optimal but I don't know how much having optimal versus still pretty damn good is worth to you. Your heads are big but they can work just fine on a street engine, not optimal but still just fine.
None of the suggestions have been bad ideas but they're not cheap either.
|04-23-2013 07:59 PM|
|04-23-2013 07:46 PM|
with a package like this, that only see fair weather, would an air gap be with it. or just "hay look an air gap"
|04-23-2013 07:30 PM|
I figured the short block at 4.280" x 4.250".
(.7854) x 4.28 x 4.28 x 4.25 x 16.387 = 1001.99 cc's
chambers = 112
Pistons = 18cc dome, so we will deduct the dome from the chambers, so that the piston is zero and the chambers are 94 cc's. Just visualize slicing the dome off with a sharp knife and glueing it into the combustion chamber. That makes the piston flat at zero and the chamber at 94.
The piston deck height is 0.010", so it figures like this....
(.7854) x 4.28 x 4.28 x 0.010 x 16.387 = 2.35 cc's
The 1027 gasket is 9.7 cc's
1001.99 + 94 + 2.35 + 9.7 = 1108.04
Deduct 1001.99 from 1108.04 and find 106.05
Divide 1108.04 by 106.05 and find 10.448:1 SCR
Maybe you figured it wrong to begin with. Or maybe my math is wrong.
"and tech. what made you pick "that" afr head and not the other two ovals??"
Street motor. Needs torque, not hp, although those tiny little heads ended up making a ton of hp too. Bigger heads will make more hp, but that's not what you need on the street. If you want a race motor, then let's stop fartin' around and build a 632 and make 900 hp.
|04-23-2013 05:44 PM|
|gearheadslife||any other ideas,(sorry) just try'n to keep my mind off the marathon..|
|04-23-2013 06:43 AM|
the edelbrooks ovals are 290 cc with either 110 or 100 cc chambers.
with a 18cc dome,
there must be a formula to get static compression with chamber size..
I know with 118 chambera I'm at 10.2 in a perfect world..
and tech. what made you pick "that" afr head and not the other two ovals??
the g.m. ovals are like 312-317cc ports..
these afr "265"s arn't those close to peanut port size?? (try'd looking up the intake port size on p/p heads and came up empty)
what would the afr2100 305 with 115 chamber being to the air dyno.
again thanks for the help
|04-23-2013 06:03 AM|
|gearheadslife||the afr's have raised exhast ports just like my darts did afr list that as not a fitment issue.. I'd think raising the port 3/8" would play havic with headers|
|04-23-2013 05:58 AM|
maybe run the brodix rr bb 0 through the sim..
tho .these would need milling to get the compression up .. but have bigger valves..
|04-23-2013 05:36 AM|
tech if you could. could you run the afr 300 ovals and 290 ovals..
whan and if you get the time..
|04-23-2013 05:10 AM|
not married to the intake I have.. so ovals are ok..
how are afr heads I've always run brodix and dart
|04-23-2013 04:16 AM|
how is a 112 chamber only 10.44 to 1.. what am i missing??
and thanks for running that..
if you could, could you flash a rec port through just for giggles(well and that I have a single plane intake for when and if I efi)
my dyno sim, only works with windows 95..
it should be noted that these engine has a cloyds "hex a just" timing set and a 3 piece timing cover to make fine tuning the cam to the engines "wants"
next best thing to a jesel belt system,
|04-22-2013 08:30 PM|
|vinniekq2||wow,that would be a fun engine.The oval port heads rule for this type of use.|
|04-22-2013 07:11 PM|
I really like putting combos together on the DynoSim, particularly with AFR heads. They use real-world parameters for their flow numbers and I use them AS-PUBLISHED. Some other head manufacturers fudge on the numbers by using larger pipes, so I factor the flow a little to make it real. AFR uses a 4.280" pipe to flow these BBC heads, so I use their flow as published. RHS, for instance, uses a 4.200" pipe to flow SBC heads. Now, you tell me, when's the last time you saw a production SBC block with a 4.200" bore?
Being a contrarian though, I decided to use the tiniest little heads that Air Flow Research makes for this street motor Sim.
The short block is 4.280" by 4.250" with 6.385" rods and 1.270" 18cc pistons, for a stack of 9.780". We will cut the deck 0.010" to arrive at a piston deck height of 0.010". When used with a Fel-Pro 1027 gasket, the squish will be 0.049".
AFR 265's get the nod, part number 3620-1. 2.19"/1.88" valves with 112cc CNC chambers. These little jewels will generate 10.44:1 static compression ratio with the dimensions listed above and should operate smoothly on pump gas with enough camshaft.
Cam will be Comp solid roller, part number 11-772-8, as seen on the cam card in this thread. It will be installed retarded 4 degrees on these 0.050" tappet lift numbers.....
IO (14) BTDC
IC (54) ABDC
EO (57) BBDC
EC (17) ATDC
Intake centerline 110
Exhaust centerline 110
Lobe separation angle 110
Overlap 31 degrees
We'll use an Edelbrock #7164 RPM Q-Jet intake manifold mounting a Cliff Ruggles-prepared 800 CFM Rochester Quadrajet. Fuel pressure at the carb inlet will be dialed in at 5 psi. Large fuel line will be used to facilitate VOLUME, not pressure.
Peak volumetric efficiency 99.3% @5500 rpm's
Peak BMEP 188.3 lbs @5000 rpm's
Dynamic compression ratio is 8.113:1. This motor will easily run on pump gas.
The motor will make another 18 hp and another 15 ft/lbs of torque with a 1050 carb, but driveability and mileage would suffer greatly in my opinion.
|04-22-2013 06:59 AM|
|vinniekq2||look at the AFR 300 cc oval port heads|
|This thread has more than 15 replies. Click here to review the whole thread.|