|05-09-2013 06:16 AM|
The HF Flanger /punch is pretty decient ,I've been using my for a few years although the little pin that holds the handle on kept falling out an the handle would fall off, when I got tired enough of that I simply welded a tiny bead at both ends of the pin and it never gave me another moment of trouble...
Tech,the punch hole is the same size on all these flanger tools it is too small for a good plug weld ,a simple way to remidy this is punch two holes overlapping each other so it looks like an 8 insted of a o ......works great....
|05-08-2013 12:44 PM|
|tech69||i think the harbor freight flanger is an ok tool. the hole puncher hole is just too darn small and doesn't let you set the hole deep enough into the panel, but you can fix that with a cutt off wheel and grinding away some metal, and it's harbor freight so who cares. i'd recommend the harbor freight flanger, it's a decent tool. if you don't do this everyday why spend on pricey tools? i wouldn't.|
|05-08-2013 08:14 AM|
Every time I post this opinion I get a bunch of people telling me I am wrong but then post their opinion and it's the same as mine! Yes I have bought a few that performed well for what I wanted, my air stapler that I bought to do my convertible top, it performed perfectly and I saved a lot of money. On the flip side the "impact" sockets I bought were absolutely worthless. I don't buy much there because what I see is junk, so I can't do a review on the junk I didn't buy. I say spend the money on quality tools that you have any idea you will be using for years, or that you want to perform at a high level, it's money well spent.
|05-08-2013 12:28 AM|
|cutthroatkid||thanks all I really do appreciate all of your fellas help.|
|05-04-2013 11:02 AM|
|cutthroatkid||Thanks I always butt weld but it seems like it has its place.I first noticed em@harbor freight then eastwood &eastwood&hf stuff seems to be the exact same tools just with a diffrent label.Anyways ill grab one of each that they have|
|05-04-2013 09:50 AM|
|BigMo||Oh crap.....EastWOOD, sorry, fingers goin too fast.....|
|05-04-2013 09:49 AM|
|BigMo||several companies make the flangers......Eastman, TIP, Northern, almost any metal working or repair supplier with have these.....Ive used them extensively over the years and IMHO its the way to go when needing strength at the seam.....Im pretty good at the butt welding gig now using a Tig torch to lay nice flat low temp hits|
|05-02-2013 08:21 AM|
|05-02-2013 06:05 AM|
for that theres a special flanger that has two wheels and you turn it with a ratchet wrench kinda like a can opener works the round wheels wont flatten the curve and you can also have round corners...if using a ratchet takes to long you can use an air ratchet to speed things up.
Everyones heard of the old saying "measure twice cut once"
my saying is "dont measure unless you have too"...
I'll show you some of my tricks (when I have more time) for getting perfect fitting patches without any measuring at all, its simple and FAST but most important a perfect fit every time...You WILL need a sharpie.....
|05-01-2013 11:35 AM|
|05-01-2013 11:00 AM|
|cutthroatkid||Thanks all for all of the wonderful info.I've been doing butt welds in for awhile,cab corneres,rockeres etc.I think I'm gonna buy tht flange&punch tool.|
|05-01-2013 10:47 AM|
|05-01-2013 10:30 AM|
I think it depends on the situation. if it's a big complicated piece than a template is a way to go. If it's just a small patch you cut it out, file the edges, then use a sharpie to trace it. Thing is, not all patches are gonna come out nicely in one piece.
So that brings me to another option...just laying metal on top and scribing around the metal. This way always leaves a perfect fit and worked well for me the last time I used it, which was on a 55 rocker. The shape would be a little bit of work to do yourself so I just laid the piece on top, used a forgiving and soft hammer face to shape it into the old, then scribed and cut it out. it was a piece of cake. Those are my three main go to's. It makes it easy, but yeah, a template works well.
|05-01-2013 10:25 AM|
wasn't being funny, it's the way it's been done for years
|05-01-2013 10:12 AM|
here's a hinge pocket where it's flanged up top but an open butt weld everywhere else. If you look close the edges are beveled where it lays over the flange. Flanging helps stuff stay straight and adds strength.
Here's another one. If I did this today I would probably open butt weld it but I'm sure the flange helped keep everything lined up nice.
|This thread has more than 15 replies. Click here to review the whole thread.|