Hey guys been awhile but I am starting a 468 blower build and looking for a good machine shop in Washington to do a long block for me.
good info thank youThese recommendations from Blower Drive Service will give you some talking points.....
Blower Drive Service: We Deliver Horse Power! - Blower Drive Systems, Blower Kits, Blower Cams, Custom Carb Service
If you were thinkin' 6-71, you should know that there is a big bore case and a small bore case. If you were thinkin' 8-71, I'm thinkin' there was only one case size.
More good info....
Blower Drive Service: We Deliver Horse Power! - Blower Drive Systems, Blower Kits, Blower Cams, Custom Carb Service
Blower Drive Service: We Deliver Horse Power! - Blower Drive Systems, Blower Kits, Blower Cams, Custom Carb Service
Note that all the cams are ground on 110 LSA for pump gas. Cams used in a blower build using 114 LSA are for using alcohol, not pump gas.
It is not out of the cards to travel for me. I just want a good reputable builder. there are a lot of "racing engine" builders out there but I want one that actually knows what he is doing. I am not gonna put 20k into a motor for it to be a boat ancor if ya know what I mean? hahaWhereabouts in Washington? Big state, and some great choices for a blower engine builder in SW Wa. around Vancouver if you're close enough.
Nutter Racing Engines & High Performance Dry Sump Oil Pumps Vancouver, Wa.
Britco Racing Engines, Centralia, Wa.
A few great ones in Portland, Or also, but that's across the river, and maybe too far? At least you'd save sales tax on your build though!