Hot Rod Forum banner

1953-56 F-100 front clip leftovers

2K views 2 replies 3 participants last post by  MARTINSR 
#1 ·
The authoities here in Norway have decided that my Volare front is illegal because of the frame notch. Does anyone out the have a set of leftover front rails from a front clip graft? I need the rail bits from just ahead of the middle rivot on the front crossover (under the radiator) and around 27" towards the rear. I ship from CA so as close as possible to cut down on shipping, but beggars can't be choosers.
 
#3 ·
Why can't you just make these pieces from scratch, they would be pretty simple. Or are they THAT picky where the pieces have to come from a frame, that would be pretty psycho but I can see it. If that is the case you could make the pieces where there is NO WAY they could tell if it came from a frame or scratch.


Brian
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top