Hot Rod Forum banner

engine bay fire help

1K views 6 replies 6 participants last post by  Old Fool 
#1 ·
hey guys my cars turbo oil feed split and set the whole bay on fire but was contained in the bay itself

so if i clean bk to bare metal with flap disc whats the best procces to paint the engine bay


many thanks
 
#3 ·
The process to paint the engine bay is the same as any other part. Strip it to bare metal. Follow paint manufacturer's directions as far as proper prep to apply epoxy primer. Once it is primed, then you can do whatever you need to get it ready for top coating.

Do not simply use an etch primer.

Aaron
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top