|Today 06:11 PM|
weather just does not want to cooperate with me , today is the coldest day we have seen yet this winter
if it doesnt start to warm up in the next day or 2 im going to borrow a few bullet heaters to heat the shop up so i can spray
|Yesterday 01:08 PM|
thanks ill post up some pics here when i get some test panels sprayed.
was going to do some today but were expecting some 40mph winds and rain here in the next couple of hours
|Yesterday 12:17 PM|
|TheCoatingStore||Take good notes and re-check your blend once you go to use a different black. I would expect you would have to actually use more pearl in the SPI black than the duplicolor since the SPI has to be stronger (ie more black in it than the duplicolor). Same with our black. Our's is much stronger than duplicolor. Good luck!|
|Yesterday 11:43 AM|
ill be using spi pure black base when i do the actual car , for testing i went out and bought 2 qts of duplicolor ready to spray jet black , and 2 qts of the duplicolor clear
the duplicolor stuff was cheap and was perfect for me to get a feel for spraying with the pearl on junk body panels
|Yesterday 11:38 AM|
Depends on the strength of your black and particle size on the blue pearl. our Midnight blue pearl has about 10 grams of blue pearl per quart and the attached photo is what you end up with so maybe that will be helpful. If you wanted to weigh up a smaller quantity for spraying 1% blue pearl on the weight of the black base would be a good starter.
|Yesterday 10:17 AM|
|Yesterday 09:37 AM|
|TheCoatingStore||I would start with about 20 grams per sprayable quart intercoat clear spray a couple of coats on with 75% overlap and adjust from there.|
|Yesterday 09:28 AM|
|shine||that'll work . i've had a set of the old tin measuring spoon for ever . only set i ever saw with a 1/2 teaspoon . worked great for pearl jobs .|
|Yesterday 08:29 AM|
|Yesterday 07:40 AM|
|shine||go to ace hardware and get a spoon set .|
|Yesterday 06:11 AM|
should be warm enough this week i can play around with some spare body parts i have laying around
when starting out with the pearl in the base coat about how much pearl powder should i add per sprayable quart ?
same with the metal flake in the clear how much flake per sprayable qt would be a good starting point ?
|03-07-2014 04:40 PM|
Probably a good time to do some test panels to try your mixes. Be sure to take good notes so you can re-create it when you got to spray next weekend.
[UR*************************** m[/URL]...Home of cool custom paints that blow your mind not your budget.
|03-07-2014 12:20 PM|
painting has been postponed one more weekend , we thoguht it was going to be in the mid 60's this weekend but the temp is at 43* currently , the heater we have in the shop is coal fired so we cant run it to warm up the shop since it puts to much soot in the air
hopefully next weekend it will stay warm
|03-06-2014 10:11 PM|
he said it should be subtle but noticeable
im really hoping hes right im going to test on some old hoods and body panels i have laying around before putting it on the car though
this is what im wanting to achive with the black/blue pearl in the base
then the silver ghost stripes , and just a hint of flake over the whole thing
|03-06-2014 10:00 PM|
|Lizer||are you painting a bass boat?|
|This thread has more than 15 replies. Click here to review the whole thread.|