|06-27-2013 05:31 PM|
They're the same carbs that were used on the 2-4 bbl combos from the factory on small block Chevies in the 50's and early 60's, as well as other GM manufacturers and also Chrysler Corporation. First motor to ever make 1 hp per cubic inch from the factory was the Chrysler 354 hemi, using two of these carbs, 1956.
|06-27-2013 05:23 PM|
|Richiehd||Lets see some pictures!|
|06-27-2013 04:58 PM|
now i've done it!
Instead of going with the '58 L230 in my '41 Plymouth P12 Sedan, i have decided to go with a 318 Poly. I have one in my '63 Dodge Power Wagon. In tribute to my Dad, who had a '57 Plymouth Fury with the Dual Quad V-800 engine option, i will be simulating that engine as close to original as possible. I have obtained a '58 Fury Dual Quad Manifold #1822004, with 2 Carter Carbs #2631S (front) and #2632S ( rear). Those are the original carb/manifold combo that came with my Dad's car. This is going to be fun!!!