|11-23-2013 10:31 AM|
I chose to not have mine on my '31 etched (MACs sells some etched) plus cut the size down a bit but that's a very nice job that you did on yours.
This is a smaller version if you are interested:
|11-23-2013 06:57 AM|
|killeratrod||looks good. glad to help out.|
|11-22-2013 10:38 PM|
Cool! Bringing back the seventies!
|11-22-2013 10:15 PM|
I finally finished the wind wings. The picture is not the best but it gives you an idea of what I wound up with. They are made of polycarbonate with a scratch resistant coating. I had the design sand blasted with 180 grit sand, using a stainless steel stencil I found on e-Bay. They turned out exactly the way I envisioned. Thanks everyone for the help.
|07-23-2013 10:50 PM|
Thanks everyone. I followed killeratrod's tip, searched eBay and found a design I liked. I'll post pictures of the wings when I'm finished.
|07-23-2013 01:59 PM|
|cm324||Here is one I photograhed at a local show. It isn't a wind wing but it will give you an idea and could be easily modified to fit a smaller window.|
|07-23-2013 07:56 AM|
A ParaGraver in the hands of a skilled artist gives a lot more definitation in the art work. acid etching is all flat. My Nephew is a jewler and does a lot of engraving, guns, glass goblets for weddings, for stained glass work. he hasn't got into doing cars. I sent him some picts a few years ago of a car I saw in Calif at a goodguys show that had a lot of engraving , valve covers, rear end cover, instrument cluster panel, door panel inserts. http://paragrave.com/
|07-23-2013 07:29 AM|
|NEW INTERIORS||Your Hobby Lobby should have everything you need..|
|07-23-2013 06:57 AM|
here i think they have what your looking for.
Peel N Etch Stencils
this link makes anything you want..
check out the listing on ebay
|07-23-2013 06:51 AM|
I don't think this is what you're after... but I am still lookin'
|07-22-2013 10:30 PM|
As I recall back in the day rubber cement was brushed on to the window to make a mask and then the design was traced on to the mask. Then taking an exacto knife the design was cut out and then the artist sandblasted the design..one can use anything pleasing such as a picture out of a magazine or something to do this with..These days with computers a sign shop should be able to make a mask for you..
|07-22-2013 09:47 PM|
|jax32||We are talking about the same thing. What I need is the design. I recall as a kid reading a story wherein they quoted the owner as saying he got the design from a doilie or a piece of lace. I have looked at all sorts of doilies and yards of lace but I can't find anything that I think would work.|
|07-22-2013 08:25 PM|
|07-22-2013 08:02 PM|
|NEW INTERIORS||Very easy to do with acid etching if we are talking about the same thing..|
|07-22-2013 07:25 PM|
I know what your after... darned if I can find any pictures.
Remember Lil John Buttera's '27 Touring.... it had the wind wings with the scrolled etchings.... you can barely see the scroll work in the photos below (also in the back window)..
|This thread has more than 15 replies. Click here to review the whole thread.|