Hot Rod Forum banner

Edelbrock performer cam specs

2K views 3 replies 3 participants last post by  JeffB 
#1 ·
Any one have on hand the lift and duration
of edelbrocks performer kit # 2027 cam shaft?
Can't get through to tech support
thanks Pat
 
#4 · (Edited)
It is really kind of a generic cam based on one available through Ford Motorsports a few years back, here is another one with the same specs:http://www.summitracing.com/parts/lun-10310100lk Summit also offered one with the same specs I bought three years ago it is very streetable with a strong bottom end and mid-range power and a nice mild rumble through Cherry Bomb glass packs.It is in my 302 pictured here. Only problem is it is a flat tappet cam and if you are thinking of it for your 1990 Lincoln 5.0 which is a roller cam motor that ain't gonna fly.Nor are the E-Street heads they are also for flat tappet cams.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top