Hot Rod Forum banner

Rack and pinion choice

1K views 0 replies 1 participant last post by  wbmusarra 
#1 ·
I am building a 66 GT40 replica and have to swap the steering from right to lefthand drive. My problem is choices of racks. I believe the Mustang II will work but I'm not sure which model will work. Tried places such as "The Steering Store", but they want specific models/years (Best prices I have found yet). There are two mounting points 17" apart and the lower A arm mounting points are 23" (85-87 Corvette). I want to stay with manual rather than power as the front end is very light. Total weight is aroud 2300#, with a 45/55 weight ratio. Also, where can I find the quick steer raio setups. Any help would be appreciated. Tried the search and knowledge base, but no dimensions given.
Thanks,
Bill
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top