Hot Rod Forum banner

replaceing a wing glass ?

1K views 4 replies 4 participants last post by  poncho62 
#1 ·
i need a little help. well i guess this is the right place for this post ?

well i need help replacing a wing glass in my 65 Chevy.

the glass is not broke but the knob rusted off inside it and then it broke off be for i got the truck :( . i will be thankful for any help any one can give me.


mathjew
 
#3 ·
Is it a hardtop , a post car, or is it a pickup? They are all different.

Troy:rolleyes:
 
#4 ·
If the wing glass has a frame around it you will have to get some glass tape to reinstall it in the frame. The glass tape goes around the perimeter of the glass that goes into the frame. You place the glass and glass tape into the frame then with a ruber mallet gently tap the glass into the frame until it is seated. Trim off the excess glass tape even with the frame.

Vince
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top