|12-12-2003 12:29 AM|
sbc head info.
i see a lot of discussion on after market heads vs. the d/hump with 202/164 valves, with a good port job what will they compare to as far as flow etc.?
|12-10-2003 01:33 AM|
|12-09-2003 06:58 PM|
292 Turbo Heads
The 292 "turbo" head was the first generation, over the counter racing head offered by Chevrolet for the small block. This is a very good cylinder head, but generally needs to be ported to serioulsly out-flow a comparable "double hump" type head.
So, the answer to your question is this, if you've got stock type open chamber heads now, the 292 turbo heads will give you a performance increase, if you are capable of doing some good pocket porting, they are easy to get some big air out of them.
A little outdated, but still a good head.
|12-09-2003 06:54 PM|
292 Turbo Head
I was thinking about buying a set of 292 turbo heads for my 350 bored .030 over. I have a edelbrock rpm manifold. And my cam specs are this 292/292 duration 480/480 lift 230/230 duration @ .050" 109 lobe separation, the cam is by Lunati. It has a 750 double pumper carb. Hei, and a 2800 stall converter with 4.10 gears. It is in a 1972 El Camino.
Is this the best choice for heads, and will it hurt my performence. Also how much lift can the springs on these heads handle?